Accessories Pack (Acce C) for Cubieboard/Cubieboard2: DVK522 + 7" LCD + USB WIFI + Camera + GPS + AT45DBXX + MAG3110

Highlights

• This acceccories pack (type C) includes:
• DVK522
• 7inch Capacitive Touch LCD (D)
• AT45DBXX DataFlash Board
• MAG3110 Board
• DS18B20
• UART GPS
• USB WIFI BL-150UM RTL8188
• USB Camera OV7670
• and other accessories.

Specification

Overview

An accessories Pack (type C) to be used with Cubieboard/Cubieboard2. It consists of expansion board DVK522, 7inch LCD, various modules, and other accessories like wires and cables, etc.

DVK522 Product introduction

1. 1.Cubieboard/Cubieboard2 connector
2. 2.Cubieboard/Cubieboard2 expansion ports
3. 3.TVOUT interface: video CVBS output, for connecting display devices like TV
4. 4.VGA interface: video VGA output, for connecting monitor
5. 5.7inch capacitive touch LCD RGB interface: for connecting capacitive touch LCD with RGB interface
6. 6.7inch capacitive touch LCD LVDS interface: for connecting capacitive touch LCD with LVDS interface
7. 7.7inch resistive touch LCD RGB interface: for connecting resistive touch LCD with RGB interface
8. 8.CAMERA interface: for connecting camera modules like OV7670
9. 9.ZIGBEE connector: for connecting ZigBee modules like Core2530, supports working with ZB501
10. 10.UART interface: easily connects to UART modules such as RS485 Board (3.3V), GPS module, etc.
11. 11.ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
12. 12.SPI0/I2C1 interface: easily connects to SPI or I2C modules such as MAG3110 Board, AT45DBXX Dataflash, etc.
13. 13.Arduino connector: for connecting compatible Arduino boards and/or Arduino shields
14. 14.UART interface (PL2303TA): connects to the UART0 of Cubieboard/Cubieboard2 for debugging
15. 15.USB interface: USB TO UART (PL2303TA)
16. 16.ICSP interface: Arduino ICSP
17. 17.5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
18. 18.12M crystal: for PL2303TA
19. 19.PL2303TA: onboard USB TO UART convertor
20. 20.RTC backup battery: 3.3V battery
21. 21.32.768K crystal: for PCF8563
22. 22.PCF8563: onboard RTC chip
23. 23.Buzzer
24. 24.AD keys: 3 common Android keys
25. 25.User LEDs: 8 LEDs
26. 26.Power indicator
27. 27.TVOUT jumper
28. 28.CAMERA power selection jumper
29. 29.RTC jumper
30. 30.RTC power selection jumper
31. 31.ONE-WIRE, Buzzer, and AD Keys jumper
32. 32.Arduino Port selection jumper: easily controlling the Arduino connection
33. 33.User LEDs jumper
34. 34.Arduino AD selection jumper
    • short the right: while connecting Arduino ADC shield
    • short the left: while connecting Arduino I2C shield
35. 35.Arduino UART selection jumper
    • short the right: while connecting Arduino UART shield
    • short the left: while connecting Arduino microcontroller board

What's in the box?

• 1 x DVK522
• 1 x 7inch Capacitive Touch LCD (D) x 1
• 1 x AT45DBXX DataFlash Board
• 1 x MAG3110 Board
• 1 x DS18B20
• 1 x UART GPS
• 1 x USB WIFI BL-150UM RTL8188
• 1 x USB Camera OV7670
• 1 x 4-pin 2-pin wires pack
• 1 x USB type A plug to mini-B plug cable
• 1 x Ethernet cable
• 1 x 40-pin FFC 0.5 200mm (same sides contact)
• 1 x 7inch LCD screws pack