Raspberry Pi RPi Model B+ Accessories Pack (Type D) ARPI600 + MQ-5 Gas Sensor + Color Sensor + Flame Sensor + Metal Sensor etc

Highlights

• An accessories Pack (type D) to be used with Raspberry Pi Model B+. It consists of expansion board ARPI600, various sensors, and features Arduino connectivity support.

Specification

ARPI600 Features

• Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
• XBee connector for connecting various XBee modules
• Sensor interface for connecting various sensors
• Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
• Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
• Onboard RTC

ARPI600 Product introduction

1. Arduino connector : for connecting Arduino shields
2. ICSP interface : Arduino ICSP
3. XBee connector : for connecting XBee communication modules
4. Sensor interface : for connecting sensors
5. Raspberry Pi connector : for connecting Raspberry Pi
6. USB TO UART
7. TLC1543 : AD converter
8. PCF8563 : RTC
9. CP2102
10. 32.768KHz crystal : for RTC
11. Power indicator
12. XBee state LED
13. XBee and Arduino interface RESET button
14. XBee EASYLINK button
15. RTC battery holder : for CR1220 button battery
16. TLC1543 reference voltage configuration jumper
17. RTC jumper
18. UART jumper
    • when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    • when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    • when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
19. Arduino AD selection jumper
    • short 2 and 3 : Arduino A0-A5 as AD input
    • short 1 and 2 : Arduino A0-A5 as digital control
20. Arduino I2C selection jumper
    • short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
21. Arduino SPI selection jumper
    • short 1 and 2 : Arduino D11-D13 as SPI control (default)
    • short 2 and 3 : Arduino D11-D13 as digital control

What's in the box?

• 1 x ARPI600
• 1 x MQ-5 Gas Sensor
• 1 x Color Sensor
• 1 x Flame Sensor
• 1 x Metal Sensor
• 1 x Hall Sensor
• 1 x Infrared Reflective Sensor
• 1 x Laser Sensor
• 1 x Moisture Sensor
• 1 x Rotation Sensor
• 1 x Sound Sensor
• 1 x Temperature-Humidity Sensor
• 1 x Tilt Sensor
• 1 x UV Sensor
• 1 x Liquid Level Sensor
• 3 x 3-pin custom connector jumper wire
• 4 x 4-pin custom connector jumper wire
• 1 x 5-pin custom connector jumper wire
• 1 x USB Type A Plug to Micro B Plug Cable
• 1 x USB type A plug to mini-B plug cable
• 1 x RPi screws pack (2pcs)