1. 8-in 1-out DIY module file download: Eight-color module stl file
Combined eight-color printing kit, install the black quick connector into the top interface of the module.
You can try to take out the push head from the original 4-input 1-output kit and put it in the DIY kit. If the push head (black) is damaged during the removal process, you can contact the official customer service to purchase some additional push heads.（SKU：L03011303，Ø7.6*4.2mm、Blue snap ring: L03010474）
Note: Two ACE Pro are required for eight-color printing.
Disclaimer:
This model has been customized and voluntarily provided by enthusiastic users from the community, based on publicly available models. While the kit has been tested by users, we cannot guarantee its stability or compatibility in all situations. Please note that this is an unofficial DIY tool, and using it is at your own risk.
2. Tools:
●S2.0 Allen key
Note: Please eject the consumables in the module before replacement.
3. Removal steps:
Step 1: Turn off the printer
Before replacement, please turn off the printer and disconnect the power supply to ensure safe operation.
Step 2: Remove the four-input and one-out assembly
Use the S2.0 Allen key to unscrew the two screws that fix the four-input and one-out assembly
Step 3: Remove the Teflon tube
Press the buckle of the four-input and one-out assembly and pull out the four Teflon tubes respectively
Step 4: Install the eight-input and one-out module
①Connect the Teflon tubes of the two multi-color boxes to the eight-input and one-out module quick interface one by one.
②Use the S2.0 Allen key to install and fix the eight-input and one-out module.
Step 5: ACE Pro connection
Put two multi-color boxes on both sides of the printer, use one signal line to connect the two multi-color boxes, and another signal line to connect the printer and a box.
