1. Preparación
a. The pre-installed USB
b. USB Keyboard
c. HUB
d. OTG Cable
2. Connect the Windows 10 device, OTG cable, HUB, USB Keyboard, USB altogether. Turn on the device and then press “ESC” till you enter the BIOS page, choose “Boot Manager”
3. Once entered “Boot Manger”, select the USB device. Enter system deployment.
4. System deployment will be proceeded under WINPE, the whole installation will be running automatically.
5. After finish, reboot the Windows device(tableta)
+1
+1
+1
+1
