Today I will instruct a method to change the emei and of your smart phone.
準備:
- the tool named “MX86_SN_Write_tool”
- ドライバ, がある 2 kinds of driver, if you have never flash your phone on your pc, it will prompt to install mt65xx driver, pls install this “USB VCOM Driver」; otherwise it will prompt to install CDC Serial driver, pls install this” imei_driver」.
- A x86 pc and a usb cable
STEPS:
1. Open the tool “SN_STATION” make sure there is no wrong note here, if it mark could not find COM, you need to change a PC.
2. Choose the write imei and COM prot “USB VCOM” AS below pic shows
3. Click “start” at bottom right corner then a new window will appear as below pic shows, fill in the imei number you need, and then click ok.
4. Then take off the battery of your phone and wait for 5 mins then put in, contact it to your pc with the usb cable. The first time you need to in stall the driver, pls install the driver as indication before.
5. And then the software will begin to write the imei auto. If succesfull, the botton will show green as below.
Pls note, if you take too long time to install the dirver, nothing would appear, then you need to dis connact the phone with PC, and repeat step 3, 4.
ありがとう, very usefull!
Unfortunately i did something wrong, i typed the wrong 2nd imei number. I wanted to change that again, but now the programm (SN_STATION) marks that i need to “reselect database and start to initiaize.” How should i do that?
わかりました, i got a bit further, but what should i do at step 4? It is not clear to me what a driver is, and where (and how) i need to install it (phone or pc). The button at SN_STATION is red now… Can someone please help me?