Tronsmart just release the offical Android 4.2 firmware for their promethues model.
Here is the changelog for new firmware:
1 新しいアンドロイド 4.2 Jelly Bean Firmware;
2 Come with rooted;
3 Add DLNA function;
4 Add smartphone control function; (if you want to use this function, you should make sure your smartphone and Tronsmart Promethues are in same network,and you should install this app in your smartphone: https://www.dropbox.com/s/0jq1vf7trx5lxb4/RC_Client.apk?m and run this app when you use the smartphone control function)
5 Sloved XBMC audio sync problem;
6 Internal storage increase to 2GB
わかりました, Firmware is Here:
https://www.dropbox.com/s/pxzok1v1ew9os1f/Tronsmart%20Prometheus%20new%20stock%20firmware.zip
and please don’t forget to download the XBMC software here:
https://www.dropbox.com/s/r0ukkplww76e50j/Tronsmart%20Prometheus-xbmcapp-20130507-debug.apk
You can’t use other XBMC version, because this one is custom made for Promethues, and will support real 1080p hardware decoding!
更新指示:
If your Tronsmart promethus has already been in the Android 4.2 beta firmware, then you should just do as following:
1. Open the download folder;
2. you will get below 5 ファイル.
3. Put these 5 ファイル (zipファイルを開かないでください) SDカードのルート, 次に、以下のアップグレード方法をフォローしてください,
(1) ペーパークリップインサートを使用して、Android TVボックスの裏側にあるリセットキーを押して保持します;
(2) Android TVボックスの電源 (広告アダプターをデバイスに接続します), 青いLEDフラッシュを待ちます 3 その後、リセットキーをリリースします;
(3) システムは自動的にアップグレードされます. (アップグレードプロセス中に電源が中断されないことを確認してください); screen will still show no siginal when you are doing upgrade, but don’t worry, it is normal!
(4) デバイスはアップグレード後に再起動します. (設定でソフトウェアバージョンを確認します - > メディアプレーヤーについて. あなたはそれを見るでしょう).
if you are still in the Android 4.1 ファームウェア, and want to upgrade to this android 4.2 ファームウェア, you should do as following:
1. Open the download folder;
2. you will get below 5 ファイル.
3. Put these 5 ファイル (zipファイルを開かないでください) SDカードのルート, 次に、以下のアップグレード方法をフォローしてください,
(1) ペーパークリップインサートを使用して、Android TVボックスの裏側にあるリセットキーを押して保持します;
(2) Android TVボックスの電源 (広告アダプターをデバイスに接続します), 青いLEDフラッシュを待ちます 3 その後、リセットキーをリリースします;
(3) システムは自動的にアップグレードされます. (アップグレードプロセス中に電源が中断されないことを確認してください); TV screen will still show no siginal when you are doing upgrade, but don’t worry, it is normal!
(4) After you wait for 5 mins , the system will reboot, and you will find you still in Android 4.1 OS, don’t worry, now what you should do is power off the promethues, and then do the above upgrade step again, and then you will find your promethues has been get the Android 4.2 アップデート!
Won’t flash on my Promethues. When using the button/power on method it won’t exit the “blank screen” phase. Tried to us the upgrade application (I’m on Android V4.2 Beta) and got a “Assert g18ref ….” failure.
Is there several different HW revisions out there?
/Johan
Is your promethues in android 4.1 or android 4.2 before you do the flash?
I’m on the last release from you. Android V4.2-Beta published here 2013-03-09
When looking at the download, の 2013-03-08 release has a file called “g02ref-ota-20130308.zip” and the new one has a file called “g18ref-ota-20130513.zip”. Discussions at a UK distributors website suggests that “g02ref” と “g18ref” is two different hardware revisions.
/Johan
Read my lips “Fix the Bluetooth” と “Fix the SD Card Reader” so that it can read cards bigger then 2 Gigs and “Fix the Flash” so that more google play games can actually work on this device.
I will take it you tested bluetooth on the new firmware without success. Waht about fhe custom rom…did anyone test bluetooth on that?
乾杯