This is the Android 4.1 Custom ROM for トロンスマート T428 quad core mini pc.
Firmware Download Link Click here
変更履歴:
1) Rooted and SU and Superuser per my usual 4.1.1 ROMs.
2) I did quite a bit of clean up to init.rc and other junk that this ROM had and came from.
It was made for a tablet thus had stuff we do not need. I cleaned up as much as I could find.
This was not something I did for the MK908 ROM. I learned more doing this ROM.
3) I added a low level but very good busybox. It does not have everything but I like it for simplicity.
If you want you can install a larger busybox from Google Play.
4) ストックROMはだけでした 1 Megs of APP space.
ただし、パラメーターファイルオプションもあります!
There are also 2gb, 4GBおよび6GBオプション.
フラッシュツールでそれを変更する方法については、以下をお読みください.
Realize if you use this 6gb option, internal SDcard will only have about 600 megs of free space!
5) いつものように, 完全なinit.dサポート! それが何であるかわからない場合… それを無視してください. それを使用したいオタクのために. そこにあります!
6) ロケーションサービスを有効にしました. これは、設定メニューになります. テストされ、それを使用するすべてのアプリで作業します.
GPSがないため、GPSをオフにすることを忘れないでください.
7) This ROM does not have a built in “hide status bar”
It also allows screen rotation in APPs.
So I have added to APPs for you to use!
full!screen which is a cool APP that allows you to control hiding of the status bar.
Rotation Locker which will allow you to stop APPs from rotating the screen.
8) build.prop編集して、通常は「互換性がない」と言うアプリにGoogle Playストアを開きます.
私は、ほぼすべてのアプリを互換性のあるものとして表示するサムスンデバイスをスプーフィングしています.
Yuur device will show up in google play as Samsung device nopt a T428 or RKSDK! これを理解してください.
また、元のburtion.Origと呼ばれるROMに元のbuild.propも残しました.
戻って行きたいなら, ESファイルエクスプローラーまたはルートファイルエクスプローラーを使用して、build.propをbuild.oldに名前を変更します。
次に、build.origをbuild.propに変更します.
設定に移動します, アプリ, すべてを使用して、Google Playアプリに移動します. キャッシュとデータをクリアします.
リブート! あなたはミニ・ネクソx5として現れることに戻るべきです.
9) This ROM does not have a built in power off.
Bootloaderへの再起動などのオプションの再起動オプションを許可する再起動アプリを追加しました (フラッシュモード).
Power off now works using this APP.
10) USB mass storage support.
Stock ROM this is set as a MTP device and there is no longer settings support to change it in 4.2.2!
I modified build.prop to change it from MTP to Mass Storage as I prefer this as it gives removable storage
for the external SDcard as well as internal SDcard.
On boot up if your connected to a PC you will get a start screen telling you USB is connected.
This is how a tablet works too. If you turn it on from this screen you will see your removable
drives on your PC.
I removed the USB on/off setting as it did not work at all so was useless.
This is also why I changed it to Mass storage.
If you want to change it back, just edit build.prop.
As reported: Netflix, Hulu, Xbox 360 コントローラ, and Droidmote , gameloft games all working in this ROM.
楽しむ!
オタク購入
Netflix working but not xbmc, even with mx and all the other tricks. Not very happy @ this point. I wish geekbuying would put pressure on rk to release the kernel source code so bob at freaktab who’s instructions you copied above, can fix this !
I received 3 Tronsmart T428 and one T428 boots up with Green Android Man (アンディ) laying on his back with Red Triangle on the Top error message. I unplug power and plug it several times but its same. I also flash firmware from Geekbuying Blob but same result.
I am not sure what should I do with other two T428? Those two T428 is working with 4.2.2 but there is not much room for XBMC, フェイスブック, スカイプ. I found out from the link below that I needs to flash 4.1.1
http://www.geekbuying.com/geekgiz/index.php/2013/05/14/tronsmart-t428-android-4-1-custom-rom/#.UZKGMKU8i9Y
That also needs flash to correct. I did downloaded this firmware and using it on that Dead T428 but I am not getting any good result then I am afraid on flash this new 4.1.1 firmware on the 4.2.2 working sticks.
What if I flash the 4.1.1 firmware and those two T428 Sticks becomes dead?
Please let me know or let your techs advice me how to fix this problem and two pcs. of T428 downgrade.
Even if you flash to 4.1.1, theres still a shutter video issue with the kernel that bob identified at freaktab. Unless rockchip release there kernel as there legally supposed to, im afraid it will be a paper weight ! Come on geekbuying, get on there case!
こんにちは,you can use this link http://www.geekbuying.com/geekgiz/index.php/2013/05/14/tronsmart-t428-android-4-1-custom-rom/#.UZKGMKU8i9Y and downgrade your t428 to androd 4.1, and you can choose 1gb or 2gb storage as your request? so you can not downgrade them?
UPDATE: I was able to install this room at the end! There is a missing file “misc_factory_test.img”in the archive… I copied it from the other 4.1.1 room and everything worked fine! しかし, with this room, I am still not able to connect to any VPN services!
乾杯
こんにちは
Thank you for this rom works perfectly with my T428
My only remaining problem is the lack of cif.ko in the loaded modules to automount share off my NAS
How can I add it?
I have read that some cannot get xbmc to work. I received mine a few days ago. Here is what happened. I went to xbmchub and downloaded MX player and the neon custom. It did not work. I removed both from my device. I then downloaded 12.1 and installed and it is working flawlessly. I read that many cannot get 12.1 to work, so its either hit and miss or something that happened when I installed the custom and then changed???
the download was actually from xbmcandroid and NOT xbmchub as stated above…sorry for the mistake.
Can this firmware work on “UG802B,UG007B,MK809III” ？
いいえ,それはできません, different wifi and bluetooth chipset.
Can this fireware work on tronsmart ts4.?
もちろん, ない, this is for android tv stick, not for smartphone.