{"id":39657,"date":"2024-05-16T20:26:57","date_gmt":"2024-05-16T12:26:57","guid":{"rendered":"https:\/\/www.geekbuying.com\/geekgiz\/?p=39657"},"modified":"2024-05-30T09:42:06","modified_gmt":"2024-05-30T01:42:06","slug":"creality-k1-series-recommended-settings-in-creality-print-slicer","status":"publish","type":"post","link":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/","title":{"rendered":"Creality K1 Series Recommended Settings"},"content":{"rendered":"\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
K1C Filaments Recommended Slicing Parameters(For Reference)<\/td>\n<\/tr>\n
Slicing parameter types<\/td>\nFilamentes Type<\/td>\nPLA<\/strong><\/td>\nABS<\/strong><\/td>\nPETG<\/strong><\/td>\n<\/tr>\n
Filaments Name<\/td>\n\n

Hyper PLA<\/strong><\/h3>\n<\/td>\n

\n

General ABS<\/strong><\/h3>\n<\/td>\n

\n

CR-PETG<\/strong><\/h3>\n<\/td>\n<\/tr>\n

pressure_advance<\/td>\n0.04<\/td>\n0.045<\/td>\n0.055<\/td>\n<\/tr>\n
Maximum Volume Speed<\/td>\n23&220\u300120&210<\/td>\n14&260\u30018&250<\/td>\n9&250\u30015&240<\/td>\n<\/tr>\n
Slicing parameter name<\/td>\nNormal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n<\/tr>\n
Quality<\/td>\nAlignment width (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (outer wall)(mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (inner wall)(mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (top\/bottom) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (fill) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (support) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Filling<\/td>\nFilling pattern<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\n<\/tr>\n
Filling density (%)<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n<\/tr>\n
Fill overlap percentage<\/td>\n30%<\/td>\n20%<\/td>\n30%<\/td>\n20%<\/td>\n30%<\/td>\n20%<\/td>\n<\/tr>\n
Connecting fill alignments<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Support<\/td>\nWhether to generate support<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\n<\/tr>\n
Support placement<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\n<\/tr>\n
Support pattern<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\n<\/tr>\n
Support overhang angle (\u00b0)<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n<\/tr>\n
Support density (%)<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n<\/tr>\n
Platform attachment<\/td>\nPlatform attachment<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\n<\/tr>\n
Housings<\/td>\nHidden Z-seams<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Wall thickness (number of layers)<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n<\/tr>\n
Top\/bottom thickness (mm)<\/td>\n0.8<\/td>\n0.6<\/td>\n0.8<\/td>\n0.6<\/td>\n0.8<\/td>\n0.8<\/td>\n<\/tr>\n
Speeds<\/td>\nPrinting speed (mm\/s)<\/td>\n300<\/td>\n300<\/td>\n150<\/td>\n200<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Starting layer speed (mm\/s)<\/td>\n60<\/td>\n60<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Idle speed(mm\/s)<\/td>\n500<\/td>\n500<\/td>\n500<\/td>\n500<\/td>\n500<\/td>\n500<\/td>\n<\/tr>\n
Speed(wall)<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Outer wall speed<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Inner wall speed<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Filling speed(mm\/s)<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Support speed<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n<\/tr>\n
Top\/Bottom velocity(mm\/s)<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Small feature speed<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Accelerations<\/td>\nPrint acceleration (mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Filling acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Outer wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Inner wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Top\/bottom acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Idle acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Starting layer acceleration(mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer printing acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer idle acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Slicing parameter types<\/td>\nFilamentes Type<\/strong><\/td>\nWood<\/strong><\/td>\nTPU95A<\/strong><\/td>\nTPU<\/strong><\/td>\n<\/tr>\n
Filaments Name<\/strong><\/td>\n\n

CR-Wood\uff08Cancelled\uff09<\/strong><\/h3>\n<\/td>\n

\n

HP-TPU(Cancelled )<\/strong><\/h3>\n<\/td>\n

\n

TPU(General)<\/strong><\/h3>\n<\/td>\n<\/tr>\n

pressure_advance<\/td>\n0.055<\/td>\n0.04<\/td>\n0.04<\/td>\n<\/tr>\n
Maximum Volume Speed<\/td>\n15&220\u300110&200<\/td>\n5&230\u30013&220<\/td>\n10&230\u30016&220<\/td>\n3.5&230\u30012&220<\/td>\n<\/tr>\n
Slicing parameter name<\/td>\nNormal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n<\/tr>\n
Quality<\/td>\nAlignment width (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (outer wall)(mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (inner wall)(mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (top\/bottom) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (fill) (mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (support) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Filling<\/td>\nFilling pattern<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\n<\/tr>\n
Filling density (%)<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n<\/tr>\n
Fill overlap percentage<\/td>\n30%<\/td>\n20%<\/td>\n30%<\/td>\n30%<\/td>\n30%<\/td>\n20%<\/td>\n<\/tr>\n
Connecting fill alignments<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Support<\/td>\nWhether to generate support<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\n<\/tr>\n
Support placement<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\n<\/tr>\n
Support pattern<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\n<\/tr>\n
Support overhang angle (\u00b0)<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n<\/tr>\n
Support density (%)<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n<\/tr>\n
Platform attachment<\/td>\nPlatform attachment<\/td>\nAuto<\/td>\nAuto<\/td>\nNo<\/td>\nNo<\/td>\nAuto<\/td>\nAuto<\/td>\n<\/tr>\n
Housings<\/td>\nHidden Z-seams<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Wall thickness (number of layers)<\/td>\n2<\/td>\n2<\/td>\n3<\/td>\n3<\/td>\n3<\/td>\n3<\/td>\n<\/tr>\n
Top\/bottom thickness (mm)<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n<\/tr>\n
Speeds<\/td>\nPrinting speed (mm\/s)<\/td>\n150<\/td>\n150<\/td>\n100<\/td>\n100<\/td>\n50<\/td>\n30<\/td>\n<\/tr>\n
Starting layer speed (mm\/s)<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Idle speed(mm\/s)<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n150<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Speed(wall)<\/td>\n75<\/td>\n75<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n15<\/td>\n<\/tr>\n
Outer wall speed<\/td>\n75<\/td>\n75<\/td>\n50<\/td>\n50<\/td>\n45<\/td>\n15<\/td>\n<\/tr>\n
Inner wall speed<\/td>\n75<\/td>\n75<\/td>\n75<\/td>\n75<\/td>\n50<\/td>\n15<\/td>\n<\/tr>\n
Filling speed(mm\/s)<\/td>\n150<\/td>\n150<\/td>\n100<\/td>\n100<\/td>\n50<\/td>\n30<\/td>\n<\/tr>\n
Support speed<\/td>\n75<\/td>\n75<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Top\/Bottom velocity(mm\/s)<\/td>\n75<\/td>\n75<\/td>\n40<\/td>\n40<\/td>\n40<\/td>\n40<\/td>\n<\/tr>\n
Small feature speed<\/td>\n50<\/td>\n50<\/td>\n30<\/td>\n30<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Accelerations<\/td>\nPrint acceleration (mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n5000<\/td>\n5000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Filling acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n5000<\/td>\n5000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Outer wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n3000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Inner wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n3000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Top\/bottom acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n3000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Idle acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Starting layer acceleration(mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer printing acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer idle acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Slicing parameter types<\/td>\nFilamentes Type<\/strong><\/td>\nPLA-CF<\/strong><\/td>\nPLA<\/strong><\/td>\nPLA<\/strong><\/td>\n<\/tr>\n
Filaments Name<\/strong><\/td>\n\n

CR-PLA Carbon<\/strong><\/h3>\n<\/td>\n

\n

PLA(General)<\/strong><\/h3>\n<\/td>\n

\n

Silk-PLA<\/strong><\/h3>\n<\/td>\n<\/tr>\n

pressure_advance<\/td>\n0.04<\/td>\n0.04<\/td>\n0.04<\/td>\n<\/tr>\n
Maximum Volume Speed<\/td>\n23&220\u300114&210<\/td>\n24&230\u300116&210<\/td>\n10&230\u30015&220<\/td>\n<\/tr>\n
Slicing parameter name<\/td>\nNormal
\n(0.20mm)
\n(Default)<\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n<\/tr>\n
Quality<\/td>\nAlignment width (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (outer wall)(mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (inner wall)(mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (top\/bottom) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (fill) (mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (support) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Filling<\/td>\nFilling pattern<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\n<\/tr>\n
Filling density (%)<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n<\/tr>\n
Fill overlap percentage<\/td>\n30%<\/td>\n20%<\/td>\n30%<\/td>\n30%<\/td>\n30%<\/td>\n30%<\/td>\n<\/tr>\n
Connecting fill alignments<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Support<\/td>\nWhether to generate support<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\n<\/tr>\n
Support placement<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\n<\/tr>\n
Support pattern<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\n<\/tr>\n
Support overhang angle (\u00b0)<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n<\/tr>\n
Support density (%)<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n<\/tr>\n
Platform attachment<\/td>\nPlatform attachment<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\n<\/tr>\n
Housings<\/td>\nHidden Z-seams<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Wall thickness (number of layers)<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n<\/tr>\n
Top\/bottom thickness (mm)<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n<\/tr>\n
Speeds<\/td>\nPrinting speed (mm\/s)<\/td>\n300<\/td>\n300<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Starting layer speed (mm\/s)<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Idle speed(mm\/s)<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Speed(wall)<\/td>\n300<\/td>\n300<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Outer wall speed<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Inner wall speed<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Filling speed(mm\/s)<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Support speed<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n<\/tr>\n
Top\/Bottom velocity(mm\/s)<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Small feature speed<\/td>\n50<\/td>\n50<\/td>\n60<\/td>\n60<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Accelerations<\/td>\nPrint acceleration (mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n8000<\/td>\n8000<\/td>\n8000<\/td>\n8000<\/td>\n<\/tr>\n
Filling acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n8000<\/td>\n8000<\/td>\n8000<\/td>\n8000<\/td>\n<\/tr>\n
Wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Outer wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n3000<\/td>\n3000<\/td>\n3000<\/td>\n<\/tr>\n
Inner wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n3000<\/td>\n3000<\/td>\n3000<\/td>\n<\/tr>\n
Top\/bottom acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n3000<\/td>\n3000<\/td>\n3000<\/td>\n<\/tr>\n
Idle acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n8000<\/td>\n8000<\/td>\n8000<\/td>\n8000<\/td>\n<\/tr>\n
Starting layer acceleration(mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer printing acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer idle acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Slicing parameter types<\/td>\nFilamentes Type<\/strong><\/td>\nASA<\/strong><\/td>\nPA-CF<\/strong><\/td>\nPA<\/strong><\/td>\n<\/tr>\n
Filaments Name<\/strong><\/td>\n\n

HP-ASA<\/strong><\/h3>\n<\/td>\n

\n

CR-PA Carbon<\/strong><\/h3>\n<\/td>\n

\n

CR Nylon<\/strong><\/h3>\n<\/td>\n<\/tr>\n

pressure_advance<\/td>\n0.04<\/td>\n0.042<\/td>\n0.036<\/td>\n<\/tr>\n
Maximum Volume Speed<\/td>\n14&260\u30018&250<\/td>\n10&260\u30018&250<\/td>\n9&260\u30014&250<\/td>\n<\/tr>\n
Slicing parameter name<\/td>\nNormal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n		Normal
\n(0.20mm)
\n(Default)<\/span><\/td>\n		High accuracy
\n(0.10mm)
\n(Minimal)<\/td>\n<\/tr>\n
Quality<\/td>\nAlignment width (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (outer wall)(mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (inner wall)(mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (top\/bottom) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Alignment width (fill) (mm)<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n0.45<\/td>\n<\/tr>\n
Alignment width (support) (mm)<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n0.42<\/td>\n<\/tr>\n
Filling<\/td>\nFilling pattern<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\nGrid<\/td>\n<\/tr>\n
Filling density (%)<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n15%<\/td>\n<\/tr>\n
Fill overlap percentage<\/td>\n30%<\/td>\n20%<\/td>\n30%<\/td>\n20%<\/td>\n30%<\/td>\n20%<\/td>\n<\/tr>\n
Connecting fill alignments<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Support<\/td>\nWhether to generate support<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\nNo<\/td>\n<\/tr>\n
Support placement<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\nAll support<\/td>\n<\/tr>\n
Support pattern<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\nZigZag<\/td>\n<\/tr>\n
Support overhang angle (\u00b0)<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n60<\/td>\n<\/tr>\n
Support density (%)<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n15<\/td>\n<\/tr>\n
Platform attachment<\/td>\nPlatform attachment<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\nAuto<\/td>\n<\/tr>\n
Housings<\/td>\nHidden Z-seams<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\nYes<\/td>\n<\/tr>\n
Wall thickness (number of layers)<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n<\/tr>\n
Top\/bottom thickness (mm)<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n0.8<\/td>\n<\/tr>\n
Speeds<\/td>\nPrinting speed (mm\/s)<\/td>\n130<\/td>\n130<\/td>\n110<\/td>\n110<\/td>\n100<\/td>\n100<\/td>\n<\/tr>\n
Starting layer speed (mm\/s)<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Idle speed(mm\/s)<\/td>\n500<\/td>\n500<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Speed(wall)<\/td>\n200<\/td>\n200<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Outer wall speed<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Inner wall speed<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Filling speed(mm\/s)<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n300<\/td>\n<\/tr>\n
Support speed<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n150<\/td>\n<\/tr>\n
Top\/Bottom velocity(mm\/s)<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n200<\/td>\n<\/tr>\n
Small feature speed<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n<\/tr>\n
Accelerations<\/td>\nPrint acceleration (mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Filling acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Outer wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Inner wall acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Top\/bottom acceleration(mm\/s)<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n5000<\/td>\n<\/tr>\n
Idle acceleration(mm\/s)<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n12000<\/td>\n<\/tr>\n
Starting layer acceleration(mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer printing acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n
Starting layer idle acceleration (mm\/s)<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n2000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

K1C Filaments Recommended Slicing Parameters(For Reference) Slicing parameter types Filamentes Type PLA ABS PETG Filaments Name Hyper PLA General ABS CR-PETG pressure_advance 0.04 0.045 0.055 Maximum Volume Speed 23&220\u300120&210 14&260\u30018&250 […]<\/p>\n","protected":false},"author":52982,"featured_media":39658,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3973,7,3978],"tags":[3996,4151,4391,4240,4392,4387,4393],"class_list":["post-39657","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-3d-printers","category-1-new-items","category-tutorials","tag-3d-printing","tag-creality-k1","tag-creality-k1-max","tag-creality-k1c","tag-creality-k2-max","tag-creality-k2-plus","tag-creality-print"],"yoast_head":"\nCreality K1 Series Recommended Settings<\/title>\n<meta name=\"description\" content=\"Here is the best Creality print Slicer settings for Creality K1 , K1C and K1 Max 3D printers\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Creality K1 Series Recommended Settings\" \/>\n<meta property=\"og:description\" content=\"Here is the best Creality print Slicer settings for Creality K1 , K1C and K1 Max 3D printers\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\" \/>\n<meta property=\"og:site_name\" content=\"Geekbuying\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Geekbuyingfans\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/janelinhuizhen\" \/>\n<meta property=\"article:published_time\" content=\"2024-05-16T12:26:57+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-05-30T01:42:06+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2024\/05\/ggh.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"720\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Jane\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@geekbuying\" \/>\n<meta name=\"twitter:site\" content=\"@geekbuying\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Jane\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\"},\"author\":{\"name\":\"Jane\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/person\/28e3bfa9d2eb3edd7806ee15211e8f9b\"},\"headline\":\"Creality K1 Series Recommended Settings\",\"datePublished\":\"2024-05-16T12:26:57+00:00\",\"dateModified\":\"2024-05-30T01:42:06+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\"},\"wordCount\":1021,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#organization\"},\"keywords\":[\"3d printing\",\"creality k1\",\"creality k1 max\",\"creality k1c\",\"creality k2 max\",\"creality k2 plus\",\"creality print\"],\"articleSection\":[\"3D Printers\",\"News\",\"Tutorials\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\",\"url\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\",\"name\":\"Creality K1 Series Recommended Settings\",\"isPartOf\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#website\"},\"datePublished\":\"2024-05-16T12:26:57+00:00\",\"dateModified\":\"2024-05-30T01:42:06+00:00\",\"description\":\"Here is the best Creality print Slicer settings for Creality K1 , K1C and K1 Max 3D printers\",\"breadcrumb\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.geekbuying.com\/geekgiz\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Creality K1 Series Recommended Settings\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#website\",\"url\":\"https:\/\/www.geekbuying.com\/geekgiz\/\",\"name\":\"Geekbuying\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.geekbuying.com\/geekgiz\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#organization\",\"name\":\"Geekbuying\",\"alternateName\":\"Geekbuying\",\"url\":\"https:\/\/www.geekbuying.com\/geekgiz\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/02\/1200x300.jpg\",\"contentUrl\":\"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/02\/1200x300.jpg\",\"width\":1200,\"height\":300,\"caption\":\"Geekbuying\"},\"image\":{\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/Geekbuyingfans\",\"https:\/\/twitter.com\/geekbuying\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/person\/28e3bfa9d2eb3edd7806ee15211e8f9b\",\"name\":\"Jane\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/05\/cropped-jane-1-96x96.jpg\",\"contentUrl\":\"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/05\/cropped-jane-1-96x96.jpg\",\"caption\":\"Jane\"},\"sameAs\":[\"https:\/\/www.facebook.com\/janelinhuizhen\"],\"url\":\"https:\/\/www.geekbuying.com\/geekgiz\/author\/jane\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Creality K1 Series Recommended Settings","description":"Here is the best Creality print Slicer settings for Creality K1 , K1C and K1 Max 3D printers","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/","og_locale":"en_US","og_type":"article","og_title":"Creality K1 Series Recommended Settings","og_description":"Here is the best Creality print Slicer settings for Creality K1 , K1C and K1 Max 3D printers","og_url":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/","og_site_name":"Geekbuying","article_publisher":"https:\/\/www.facebook.com\/Geekbuyingfans","article_author":"https:\/\/www.facebook.com\/janelinhuizhen","article_published_time":"2024-05-16T12:26:57+00:00","article_modified_time":"2024-05-30T01:42:06+00:00","og_image":[{"width":1280,"height":720,"url":"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2024\/05\/ggh.png","type":"image\/png"}],"author":"Jane","twitter_card":"summary_large_image","twitter_creator":"@geekbuying","twitter_site":"@geekbuying","twitter_misc":{"Written by":"Jane","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#article","isPartOf":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/"},"author":{"name":"Jane","@id":"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/person\/28e3bfa9d2eb3edd7806ee15211e8f9b"},"headline":"Creality K1 Series Recommended Settings","datePublished":"2024-05-16T12:26:57+00:00","dateModified":"2024-05-30T01:42:06+00:00","mainEntityOfPage":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/"},"wordCount":1021,"commentCount":0,"publisher":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/#organization"},"keywords":["3d printing","creality k1","creality k1 max","creality k1c","creality k2 max","creality k2 plus","creality print"],"articleSection":["3D Printers","News","Tutorials"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/","url":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/","name":"Creality K1 Series Recommended Settings","isPartOf":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/#website"},"datePublished":"2024-05-16T12:26:57+00:00","dateModified":"2024-05-30T01:42:06+00:00","description":"Here is the best Creality print Slicer settings for Creality K1 , K1C and K1 Max 3D printers","breadcrumb":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.geekbuying.com\/geekgiz\/2024\/05\/creality-k1-series-recommended-settings-in-creality-print-slicer\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.geekbuying.com\/geekgiz\/"},{"@type":"ListItem","position":2,"name":"Creality K1 Series Recommended Settings"}]},{"@type":"WebSite","@id":"https:\/\/www.geekbuying.com\/geekgiz\/#website","url":"https:\/\/www.geekbuying.com\/geekgiz\/","name":"Geekbuying","description":"","publisher":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.geekbuying.com\/geekgiz\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.geekbuying.com\/geekgiz\/#organization","name":"Geekbuying","alternateName":"Geekbuying","url":"https:\/\/www.geekbuying.com\/geekgiz\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/logo\/image\/","url":"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/02\/1200x300.jpg","contentUrl":"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/02\/1200x300.jpg","width":1200,"height":300,"caption":"Geekbuying"},"image":{"@id":"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/Geekbuyingfans","https:\/\/twitter.com\/geekbuying"]},{"@type":"Person","@id":"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/person\/28e3bfa9d2eb3edd7806ee15211e8f9b","name":"Jane","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.geekbuying.com\/geekgiz\/#\/schema\/person\/image\/","url":"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/05\/cropped-jane-1-96x96.jpg","contentUrl":"https:\/\/blogimage.geekbuying.com\/wp-content\/uploads\/2023\/05\/cropped-jane-1-96x96.jpg","caption":"Jane"},"sameAs":["https:\/\/www.facebook.com\/janelinhuizhen"],"url":"https:\/\/www.geekbuying.com\/geekgiz\/author\/jane\/"}]}},"_links":{"self":[{"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/posts\/39657","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/users\/52982"}],"replies":[{"embeddable":true,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/comments?post=39657"}],"version-history":[{"count":1,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/posts\/39657\/revisions"}],"predecessor-version":[{"id":39659,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/posts\/39657\/revisions\/39659"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/media\/39658"}],"wp:attachment":[{"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/media?parent=39657"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/categories?post=39657"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.geekbuying.com\/geekgiz\/wp-json\/wp\/v2\/tags?post=39657"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}