Sunlu S1 3D Filament Dryer, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Maximum Capacity 210 x 85 mm

Highlights

Wet 3d printing filament will cause stringing, clogging, poor adhesion, and Layer Shift. SUNLU dry box is specifically made for the purpose of drying while printing to remove moisture from a spool of filament, so as to improve your 3D model.

Personalized Temperature Setting

The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35 - 55 degrees. Suitable for multiple 3d printing filament commonly used in the market

Personalized Drying Time Setting

Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing effect. Our filament dryer box allows you to manually set the drying time from 0~24 hours.

2 Probes + 2Built-in Rotating Shafts

The filament dehydrator has 2 probes to detect the temp of the cabinet and the heating plate and 2 built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture.

1.75mm/2.85mm/3.00mm Compatibility

Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.

Specification