Categories

Artillery Sidewinder X2 3D Printer, ABL Auto Calibration, Titan Direct Drive Extruder, 180-240 Degrees, 300*300*400mm Larger Build Volume

Ship to:
United States
Select the desired shipping method
Shipping Company Estimated Delivery Time Shipping Cost
*Please note: the shipping costs are only estimates; the actual shipping price will be shown on the order page.
0 item(s) added
View CartContinue Shopping

Highlights

95% Pre-Assembly

DIY all-in-one structure, the Sidewinder X2 comes 95% pre-assembled, which makes installation easy as can be. 3 minutes to complete assembly.

Fast Printing Speed

The print speed of Artillery Sidewinder X2 can reach up to 150mm/s, and the 0.4mm direct drive extruder makes high-quality print, especially for flexible filament.

Automatic Bed Leveling

With matrix automatic bed leveling, Intellisense, and precise testing, the device supports dynamic leveling compensation and frees you from complex manual leveling, which proves to be efficient and intelligent.

Synchronized Dual Z System

There are 3 inductive sensor end stop separately set on the XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, the synchronized dual Z system greatly increases its printing stability.

Large Build Volume & Color Touchscreen Control

Sidewinder X2 3D printer features a 300 x 300 x 400mm build volume and color touchscreen control. It is simple and easy to understand the operating interface, bringing you more possibilities for creating your 3D printings.

Tempered Glass Platform & AC Heat Bed

The printer has a direct drive extruder and a fast-heating AC heat bed with built-in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. AC heat bed can be heated to 110 Celsius in 2 minutes. The tempered glass platform makes print more smoothly and adheres well.

Resume Printing Function

The product has the function of detecting filament runout and power interruption and resumption of printing, giving an alarm before filament runout; it is featured by continuing usability after power recovery, versatile functions, and deserves trust in use.

Exclusive Ultra-quiet Stepper Driver

The ultra-quiet system, assisted by the exclusive ultra-quiet stepper driver, undergoes high-load safety testing during which the machine operates at low decibels throughout the entire process, thus realizing quiet printing.

Artillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-Assembled

Specification

General Brand: Artillery
Type: 3D printer
Model: Sidewinder X2
Color: Black
Specification Build volume: 300 x 300 x 400 mm
Layer resolution: 0.1mm – 0.35mm
Filament diameter: 1.75mm
Supported materials: PLA, ABS, Flexible PLA, Wood, PVA, HIPS
Frame: Aluminum Extrusion
XYZ resolution: 0.05mm, 0.05mm, 0.1mm
Nozzle diameter: 0.4mm
Nozzle heat up time: < 3 minutes
Build plate heat up time: 80C in less than 2 minutes
Operating sound: < 70dBA
Power consumption: 110V 700W max (w/ heated bed turned on)
Control board: Ruby 32
Product dimensions: 21.65 x 15.94 x 34.25 in (with spool holder)
Maximum Print Speed: 150 mm/s
Maximum Travel Speed:250mm/s
Maximum Build Plate Temperature: 130˚C
Connectivity: USB, TF Card, USB Stick
Weight & Size Product Weight: 12.9kg
Package Weight: 16kg
Product Size(L x W x H): 55*40.5*87cm
Package Size(L x W x H): 66.8*50.8*31cm
Package Contents 1 x Artillery Sidewinder X2 3D Printer
1 x Assembly Tool Kit
1 x Assembly Instruction
1 x Assembly Guide

Videos

Customer Photos

Customer Videos

Be the first to Upload A Video of this product!

Customer Reviews

4.94out of 5
5 star 284
4 star 6
3 star 6
2 star 0
1 star 0
Write A Review See all 296 reviews
All (296)
Images (50)
Videos (0)

        Questions & Answers

        FAQ

        Q1: What if my hotend/heated bed starts heating after powering on?

        A: 1. Power off the printer immediately;

        2. The problem was caused by a faulty mosfet on the mainboard, replace the mainboard.

        Q2: What if my printed mold is not sticking to the bed?

        1. Re-level the bed, and make sure to pre-heat both the hotend and bed to the print temperature;

        2. The print bed sticks better with a temperature around 10C higher than the bed temperature suggested by the most manufacturer;

        3. Do not turn off the bed during printing, due to the nature of the coating, it will release the print once it’s cooled down, turning off the bed mid-print will cause the bed to release the print;

        4. You may wipe the print surface with IPA once it’s completely cooled down. Never clean it with any cleaning products.

        Q3: My build plate/Y-axis/platform is not stopping when homing, what should I do?

        A: 1. Do a visual check on the endstop sensor, make sure it’s not crushed by the screw;

        2. With the power turned on, use a piece of metal to trigger the Y endstop sensor, if there’s no red LED lighting up, the endstop sensor is faulty, replace endstop sensor;

        3. Move the platform to the very front of the print and home Y individually, using a piece of metal to trigger the Y endstop sensor right after pressing home;

        a. If the build plate stops, the sensor is working correctly, check if there is anything beneath the bed obstructing its movement;

        b. If the build plate does not stop, the sensor is faulty, replace Y endstop sensor;

        4. If none of the above solves your problem, contact customer services for further assistance.

        Q4: My auto-level sensor does not perform a self-test, how to deal with it?

        1. Power off the printer, and wait till the screen is completely off;

        2. Power on the printer;

        3. If the auto level sensor does not perform a self-test (probing pin comes down and up twice) when powering on, please perform the following:

        a. Gently pull the pin down by hand a repeat steps 1-2;

        b. If the sensor still failed to perform a self-test, contact customer service for a solution.

        Support & Firmware

        Learn More

        Artillery Sidewinder X2 3D Printer, ABL Auto Calibration, Titan Direct Drive Extruder, 180-240 Degrees, 300*300*400mm Larger Build Volume
        Geekbuying's price match guarantee

        Fill in the details below for this product, after Geekbuying has verified the provided information, our sourcing team will get the best price possible.

        Item Code: 472515
        Please enter a valid email address

        Please make sure all the details filled in above are accurate. Our support team will send an email with a discounted offer if possible within 48 hours.

        Information submitted Our support team will send an email with a discounted offer if possible within 48 hours.
        Why buy from Geekbuying?
        Amazing offers

        Find best offers for smart gadgets at one place

        Easy & secure payments

        Pay directly via PayPal among other payment options

        Local stock & fast shipping

        Buy from local stock and ship within 24-hour

        Customer support

        24-hour customer support for all your queries

        Connect with us
        You have successfully created your account!

        An activation link has been sent to your email address. Activate your account to access the following:

        If you have not received an activation email, please click below to resend the activation email.

        Resent successfully. Please check your email box to get the discount!

        We’ve found previous orders with this email. Would you like to merge them with your new account?Yes
        Resend Activation Email
        Resent successfully. Please check your email box to get the discount!
        Leave Continue
        Verify Your Identity

        Please enter the 4-digit Verification code sent to

        Haven't received the code? Resend

        Cancel Verify Email
        Share Your Shopping Experience
        Your feedback matters! Help us improve your shopping experience
        (1 =Very poor, 5 = Excellent!)
        Please select your feedback topic
        Shopping Experience Report an Error Recent Order Shipping or Delivery Customer Service Other
        This field is required
        Please Select
        Product detail Search or recommendation
        This field is required
        We apologize for the inconvenience. What was unsatisfactory?
        Too many results but filters are not convenient
        No search results
        Search results didn't match my query
        Couldn't find the product I wanted
        Other (Please provide the search terms or a description of the issue so we can improve)
        This field is required
        We apologize for the inconvenience. What was unsatisfactory?
        Not enough product detail shown
        Missing video descriptions
        Lacks real user reviews
        Doubts about the functionality displayed
        Other (Please provide the product link or ID, and a description of the issue so we can improve)
        This field is required
        What is the main reason you're hesitating to purchase?
        Comparing with similar products
        Unsure which product is the best fit
        Doubts about functionality or quality
        Lack of detailed product information and reviews
        Waiting for a discount
         Price is too high
        Other (Please provide the product link or ID, and a description of the issue so we can improve)
        This field is required
        Please share more details
        0/500
        This field is required
        Please enter a valid email address
        0/5
        Thank you!

        We're sorry your experience wasn't as great as we'd like it to be. Your feedback is valuable to us.

        We appreciate your feedback! It's great to know that you had a good experience. Your support encourages us to keep up the good work.

        We can't respond directly to comments submitted here. Need help? contact us
        Send Feedback Cancel Done