- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
- Arduino UNO R3 and the compatible board can directly connect to this module
- On-board reset button
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to design projects by AT command
- On-board switch to select UART mode or firmware update mode
- This is WiFi serial transceiver module, based on ESP8266 SoC.The SOC has Integrated TCP/IP protocol stack.It is TTL serial communication interface and its parameters can be set by AT command. It is widely used in networking, smart home project when it is connected to the wifi router. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, controlling home appliances and smart car by the mobile phone.
Specification
General | |
---|---|
Type | ESP-07 ESP8266 Serial Wifi Wireless Module |
Interface Logic Voltage |
3.3V / 5V compatible(On-board level shift circuit) |
Working Voltage | 4.5V - 5.5V (On-board 3.3v LDO Regulator) |
Working Current |
240mA(MAX) |
Serial Port Baud Rate |
115200 (default), can be modified to other values by AT command |
Serial Communication Format | 8N1 |
Antenna Type | Built-in ceramic antenna is available, and you can also use an external antenna. |
Wireless Network Mode | Station / softAP / SoftAP + station |
Wireless Criteria |
802.11 b / g / n |
Compatible | Arduino |
Rayfile | //pan.baidu.com/s/1ntotvwX |
Package Contents | |
1 x Serial Wifi module |
Customer Photos
Customer Videos
Customer Reviews
5 star | 0 | |
4 star | 0 | |
3 star | 0 | |
2 star | 0 | |
1 star | 0 |
- All (0)
- Images (0)
- Videos (0)