Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers
テレビボックス & ミニ PC

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers

Hi guys:

Again, in the help of our Developer Team(big thanks to their support!!!), we made a real 1080P rom forリコマジック MK802Ⅲ Mini PC.

Here is the firmware download link:

https://www.dropbox.com/s/ls2dl3hcnelfpnr/GeekBuying%201080p_11_15_2012_MK802_III.7z

 

パスワード: geekbuying.com

Detail:

-Rooted

-Split boot.img and kernel.img

-1080p Kernel

 

Here is some screenshot after you update this firmware:

Rikomagic MK802 III 1080P Firmware Release for Geekbuying CustomersRikomagic MK802 III 1080P Firmware Release for Geekbuying CustomersRikomagic MK802 III 1080P Firmware Release for Geekbuying Customers

Update instruction:

Download the following two files:

Rockchip USB Driver:

https://www.dropbox.com/s/2eqo5dcsu5bbhki/RockusbDriver.rar

RK flash tool:

https://www.dropbox.com/s/u2ce4lfx0t9asc6/flash%20tool.rar

1)Installation of”Rockchip USB Driver

1.How to install “Rockship USB Driver? first ,you should connect your MK802 III to your pc or laptop(note:you must connect the OTG port ,not DC 5V charaging port),and then open MK802 III settings: USB—click”connect to pc”—–developer options—-click”USB debugging” —–Storageclick”mass storage”.so your MK802 III will recognize your PC or laptop,an installation interface will pop up.

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers2.Click “Browsebutton to select the corresponding system, according to the actual situation of the drive path, click on the “Nextbutton, follow the instruction in the picture,and the installation has been done:

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers

2)Open your download tool“flash tools\RKBatchTool.exe”,and choose “update.img”,Then the screen will appear the picture below.And choose the pre-downloaded new firmware update ,follow the picture instruction .

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers
3) Use the USB to micro USB cable to connect your PC and TV(note:you must connect the OTG port ,not DC 5V charaging port), and then open your MK802 III settings:設定–>Storage–>(Menu)USB computer connection–>Mass Storage

Rikomagic MK802 III 1080P Firmware Release for Geekbuying CustomersRikomagic MK802 III 1080P Firmware Release for Geekbuying Customers4)Close MK802 III setting: settings—-developer optionsdelete”USB debugging”.

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers5)When all of settings you have done ,you will see your “flash tools\RKBatchTool.exe as follow,the tool will recognize MK802 III and the purple light will turn on.

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers5)The last step is to click updatebutton, If all went well ,the green light will turn on, you have updated MK802 III successfully.

Rikomagic MK802 III 1080P Firmware Release for Geekbuying Customers


 

We are not just selling TV stick, we also support Tech support for our customers all the time!!!

 

 

オタク購入ブログ
+1
0
+1
0
+1
0
+1
0

17 コメント

  1. I’m getting an error when i’m trying to make the update , can someone help me ?

  2. アバター写真

    what error message does you get? we have flashed it without problem.

    thanks

  3. こんにちは,
    yesterday I received from geekbuying.com MK802 III. What was quite disappointing was the poor screen definition of the standard ROM. それで, surfing your blog I downloaded this firmware, and after some problem understanding the the correct way to flash, I completed firmware update. First reboot: all worked fine. しかし! The second time I turned off the MiniPCGAME OVER! It seems to be bricked to the initial boot. I can see geekbuying logo, then the little green robot starts closing eyes, and nothing more! I’m not able anymore to connect the dongle to PC, it is not recognized anymore. And I’m not able to flash through TF (neither with the official firmware). It simply doesn’t start and boot doesn’t complete. I’m very stressed by this behavior, and hope you can give me support in order to get it working back.
    Is there a way to connect it to RKBatchTool in some way?
    PLEASE HELP!!!!!!!

  4. アバター写真

    こんにちは
    YOu can connect with RKBatch tool, and then flash via the tool. and use my other firmware.

    thanks

  5. こんにちは, as I said the dongle is not recognized anymore by the PC. Connecting the cable nothing happens. RKBatchTool squares never become purple or redHave you got a way to get it connected again? ありがとう

  6. わかりました, I got rid of the problem 🙂
    I opened the case as advised by rikomagic recovery guide and, with a thin metal stick I place the stick between 6th and 7th pin of the flash chip. Then powered on. PC recognized the dongle. Another thing to be careful is that the USB device is not recognized if you use a USB cable extender. You have to use USB-OTG cable only. Hope my experience can help someone else. ノート: at the moment I have not a HDMI device to see it workingbut at least flash seems to be ok. bye

  7. Question: is there another geekbuyingreal 1080P rom” ? To have a real HD environment? BR

  8. can someone help me with the error above please

  9. Gabi

    You should use a 5v 2 amper supply to power the mini pc or it won’t update. check that

  10. The links to download the drivers and the tool doesn’t function anymore.

    Is it possible to put it again?

    ありがとう

  11. In the mk802III hardware that I got today, when I checked the software version, it says MK802III_admin 4.1.1sd 1.00.1015 dated 20121221 …I need to know if the remote control feature will work with this version and how to get the shutdown feature in this hardware as I dont see these features inbuilt. Do I already have the latest installed or I have to install the one that is in this page to get the Remote control feature and Shut Down Feature?

  12. link is broken…. pls provide working link
    thanks for advance

  13. オタク購入ブログ

    you may need an agent server.

  14. オタク購入ブログ

    you may need an agent server