300Mbps Wireless-N WiFi 802.11n Repeater Router 2.4GHz WLAN Range Expander Extender Router with US Plug Adapter- Black

Highlights

• Software wizard for simple setup.
• Improve wireless coverage in all WLAN networks.
• Support Wireless Repeater Mode and Standard AP Mode.
• The WiFi Repeater extends the range of your WLAN network easily.
• The WLAN client must support at least the WPA encryption standard.
• WLAN access point and the WLAN client with automatic IP address assignment (DHCP).
• Forwarding of IPv4-based protocols/Address Resolution Protocol.
• The network name (SSID) of the WLAN access point must be set to "visible".
• The connection to a media receiver you can use to receive television over the Internet.
• Access to the Internet for computers located on the edge or outside of the range of your access point.
• The Wireless-N Repeater is mainly used for providing free WiFi service in big area such as factory, community, street or etc.

Specification

• WLAN 802.11n (Draft 2.0) for wireless high-speed access
• Downward compatible with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
• Provides up to 300Mbps transmission rates
• WLAN 802.11n for wireless high-speed access
• Support 2.4GHz WLAN networks
• Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports
• Maximum WLAN security with WPA2, WPA and WEP (128/64)
• Power Supply Unit: 100V-240V AC
• Operating temperature: 0~40 (32~104).
• Storage temperature: -40~70 (-40~158).
• System Requirements:
• WLAN access point/client according to IEEE 802.11n, g, b
• 110~230-volt socket

What's in the box?

• 1 x Wireless-N Repeater
• 1 x RJ-45 Networking Cable
• 1 x English Qucik Installation Guide