- Shipping Company Estimated Delivery Time Shipping Cost
- This item cannot be shipped at your location
Highlights
3D Laser Printer
Hydra 3D Laser Printer integrates the functions of 3d printing and laser engraving. It features a 300*300mm engraving size and 2.5W laser power, and can carve MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, etc.
Large Build Volume
Featuring a 305*305*400mm build volume, Hydra allows you to print large and complex models.
Safety Protection
Power Supply within 3 mins the hotbed heats from 0 to 240°C. And thanks to the power-off protection system, printing can be resumed even after power outrage or machine failure, achieving fast heating and long-term printing.
Auto-Leveling
Thanks to the 3Dtouch probe, the Hydra can use the Mesh Bed Leveling process to compensate for microscopic imperfections of the print sheet, and inconsistencies caused by the assembly and stacking of the manufacturing tolerances of various parts. Achieving a great-looking first layer becomes quick and easy.
Silent Operation
Equipped with upgraded TMC2209/2226 ultra-mute stepper motor driver chip which offers silent motors and no end-stop switches, opening the doors to printer PCBs with installed drivers and no heatsinks or jumpers. Or cooler running for step-stick retrofits.
User-friendly Color LCD Screen
Configure your 3D printer quickly and easily, and get sliced model previews before you start printing! Every option is simply a few clicks away thanks to the 2.8", 240320 LCD screen with 65.000 colors.
Filament Runout Detection
The filament runout sensor can detect whether the filament is run out during the printing process. It will send a signal to the printer when the filament is run out and the printer will stop printing. Printing will resume automatically when the new filament is loaded. With this, you won’t have to worry, especially with long prints, that your filament will run out and cause any problems.
Fast Assembly
You will be able to have the printer up and running within 2 minutes of assembling just 4 screws.
Wide Compatibility
Tevo Hydra is fully compatible with a wide range of numerous types of materials like PLA, ABS, Flexible PLA, HIPS, WOOD, PVA, etc.
Specification
| General |
Brand: TEVOUP |
| Specification | Build volume: 305x 305 x 400 mm | 11.8 x 11.8 x 15.75 in Engraving Size: 300x300mm Laser Power: 2.5W Layer resolution: 0.05mm – 0.35mm (on 0.4 nozzle) Build speed: 30mm/s – 150mm/s Travel speed: 250mm/s Print surface: Removable Glass-ceramic (magnetic PEI flex plate as an upgrade) Heat bed type: AC heat bed (SSR Normally Open) Number of extruders: 1 (2 via optional upgrade kit) Filament diameter: 1.75mm Supported materials: PLA, PLA FLEX, PLA WOOD, ABS, PETG, HIPS, ASA, PA, PC Standard features: Modular X-Carriage, ABL, touchscreen, synced dual-z, direct drive, silent drivers Advanced features: 3dtouch, filament detection sensor, sensorless homing Calibration: Auto bed leveling - BILINEAR 9 points Print technology: FFF (Fused Filament Fabrication) Feeder type: DIRECT DRIVE DUAL DRIVE BMG extruder + V6 VOLCANO HOTEND Max Z-axis resolution: 0.05mm Nozzle type: V6 Nozzle diameter: 0.4mm (spare nozzle: 0.4, 0.6, 0.8) Nozzle temperature: 150°C – 240°C ptfe heatbreak throat Nozzle heat up time: < 2 minutes Build plate heat up time: 120C in less than 2 minutes Operating sound: < 55dBA Power consumption: 110 – 240V 600W max (w/ heated bed turned on) Control board: 32bit MKS Robin nano v3.0 / TMC 2209 v2.0 UART MODE/ Marlin 2.0.9.1 / 3.5 Inch touchsceen |
| Weight & Size | Product Weight: 16kg Package Weight: 19kg Product Size(L x W x H): 560 x 600 x 620 mm | 22.05x 23.62 x 24.41 in Package Size(L x W x H): 635 x 520 x 280 mm | 25.98 x 22.05 x 12.20 in |
| Package Contents |
1 x TEVOUP HYDRA 2-IN-1 3D PRINTER |
