- Shipping Company Estimated Delivery Time Shipping Cost
- This item cannot be shipped at your location
Highlights
1000mm/s High-Speed Printing
The FLSUN T1 Pro Delta printer is equipped with a high-performance control chip and a high-speed cooling silent fan, supporting a maximum speed of 1000mm/s and an acceleration of 30,000mm/s², allowing you to enjoy instant high-speed printing while maintaining the precision quality of the model.
AI Camera
FLSUN T1 Pro is equipped with a high-definition camera, which can realize real-time intelligent monitoring, ensure the speed and accuracy of printing, and take time-lapse photos to record the printing moment.
High-performance Effector
Dual gear direct drive powerful extruder, temperature can reach 300°C, amazing flow rate 90mm³/s, guaranteed printing speed, equipped with outer cover to ensure the temperature of the printing room, suitable for PLA, PETG, TPU, PVA, PET, ABS, ASA, PA, PC and other materials, performance is better than the same type of fdm 3d printer
Multiple Convenient Functions
One-button fully automatic leveling for simple printing. Equipped with a material break detector for material break detection and vibration compensation to further improve the accuracy and completeness of printing. Bottom heating to ensure the first layer of printing
Fully Upgraded, Easy to Operate
FLSUN T1 Pro supports a variety of slicing software, supports WIFI connection, color high-definition touch screen, simple operation suitable for beginners and adults. It can be installed in just ten minutes, and the 55 decibel silent printing will not affect your life.
FLSUN T1 Pro FUEL YOUR PRODUCTIVITY
- Max Speed 1000mm/s
- Max Acceleration 30000mm/s²
- Max Flow 90mm³/s
- up to 1000mm/s
- down to 55dB
- SMOOTH Printing
- max. height 330mm
- Auto-Levelling
- Reliable & Durable 78N Extruder
1000mm/s Redefine High Speed
Accelerate your creations with T1 Pro's 1000mm/s print speed. Say goodbye to sluggish printing processes and embrace efficiency like never before.
Delta is the Future
Experience swift directional changes, reduced inertia, and enhanced accelerations. The Delta 3D printer is superior not only in speed but also in quality. It's a game-changer.
Cool Down, Efficiency Up
The upgraded turbo fan dynamically adjusts the wind speed for different parts. Running at 55dB, you can focus on your creations without distraction.
Extruder
A lighter dual-gear direct drive extruder reduces inertia and enhances print quality with precise filament control.
Motion Control
Experience precise movements and improved print quality with the T1 Pro's optimized motion control system.
Parallel Multilink
Swiftly change motion direction and speed, ensuring accurate and consistent results.
Precision for Every Layer
Enjoy perfect layer quality every time with T1 Pro's optimized auto bed leveling algorithm for higher leveling accuracy.
Enclosed Chamber
The closed chamber allows the whole material to be cured at a more uniform temperature. And the temperature changes gradually. This is conducive to the improvement of print quality.
Efficient Hot End
In fast printing, the efficient hot end ensures high-quality continuous production with a high hot end flow rate. With an efficient cooling system, high-speed, high-quality and efficient 3D printing can be achieved.
FLSUN Slicer 2.0
Optimize the Simple cross-hatch fill routing path to improve model printing quality. Optimized and adjusted the "Z hop threshold" to effectively control the drawing of some consumables.
- Real-Time Monitoring
- Touch Screen Guide
- Time-Lapse Photography
- Filament Runout Sensor
- Resumes After Outages
Specification
| General | Brand: FLSUN Type: 3D Printer Model: T1 Pro Color: Black |
| Specification |
Speed Body ToolHead Heatedbed Sensors Electronics Software |
| Weight & Size | Product Weight: 18.4kg Package Weight: 22.5kg Product Size(L x W x H): 83.6*49*43.6cm Package Size(L x W x H): 87*60*24cm |
| Package Contents | 1 x 3D Printer 1 x Accessory Box 1 x Service Policy 1 x Power Cord 1 x User Manual |
Videos
Customer Photos
Customer Videos
Customer Reviews
Questions & Answers
FAQ
1. What is the normal printing speed?
1000mm/s.
2. Is the nozzle brass or hardened steel?
Brass.
3. What is the highest temperature the nozzle can print at?
300°C.
4. Does the camera have a time-lapse photography function?
Yes, multiple files can be saved.
5. Is there a casing? What material is it made of?
The shell is standard, the sides are acrylic, and the front door is glass.
6. What material is the fuselage made of?
The frame is made of all metal, the shell is made of acrylic, and the upper and lower shells and the column surface are ABS.
7. Does it work out of the box?
Currently shipped in modular form and requires assembly.
8. What is the upgrade method?
OTA online upgrade.
9. What operating systems does the slicing software support?
MacOS, Windows.
10. What file formats does the slicing software support?
STL, OBJ, AMF, 3MF.
11. What consumables can I use to print?
Recommended: PLA, PETG, TPU.
Applicable: ABS, ASA, PA, PC, PET.
12. Can consumables weighing more than 1 kg be placed in the chamber?
Currently, only consumables under 1kg can be placed in the cavity. If the consumables exceed 1kg, the consumables can be placed outside the cavity through the hole on the upper shell.
