Ship to:
United States
Select the desired shipping method
- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
- ?USB interface directly communicate with PC for setup and data download
- ?User can set access password for data logger
- ?User can name each channel and enable/disable specified channel freely
- ?LED alarm enable/disable, LED alarm hold enable/ disable and alarm limit settings for all channels via DGraphTM
- ?User can input formula to customize compound line
- ?User can create and customize new unit easily and freely
- ?Logging status indication via red/green LED and battery status indication via yellow LED
- ?Start logging method: Immediately, Button, Delayed
- ?User can input two point calibration value for each channel when setup
- ?Replaceable lithium battery and logged datas are not lost if battery exhausted
Specification
| Brand | Bside |
| Model | BDV01 |
| Measurement range | 0 to 30V |
| Resolution | 0.04V |
| LCD | NO |
| Memory Capacity | 64KBytes |
| Sample Rate | 1sec. to 12hr. |
| Start Method | Immediately, Start by button, and Start at date&time |
| Stop Method | Stop when memory full, overwrite when memory full, stop by button and stop until specified number of sample points finished |
| Sample Mode | Instant(default), average, maximum and minimum This will decide how to dispose data at idle time between a sample interval |
| Button | Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold |
| LED | Red&green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished) (Sofware can disable this two LED for saving power) Yellow LED: Low battery indication |
| Alarm | User programmable high or low alarm limit for each channel(If necessary) LED alarm and hold |
| Communication | Direct USB connection Need to install the driver provided on CD |
| PC Software | DGraphTM software and USB driver required (Included on CD) (Compatible with Windows XP, Windows Vista, Windows 7&8(32 bit & 64bit Versions)) Use these software to setup, download, view graph and analyse data |
| Power Supply | User replaceable 1/2AA 3.6V Lithium Battery 1200mAh (not included) NOTE: USB interface can supply power directly if necessary |
| Battery Life | Approx. 3 Years @ 1 Minute Sample Rate NOTE: It also Depends on using of LEDs |
| Operating Range | 0 to 100% RH -35 to 80°C(-31 to 176°F) |
| Storage Range | Recommended: 20 to 60% RH 10 to 50°C(50 to 122°F) |
| Case Material | ABS |
| Standard Compliance | CE |
| Dimentions | 130mm×37mm×23mm(5.1"×1.5"×0.9") |
| Weight | Approx. 56 grams(2.01oz) |
| Package content | 1 x Data logger 1 x Software CD 1 x Quick start guide |
Customer Photos
Customer Videos
Customer Reviews
Clear
View all
View all
Photos
Videos
All star
All star
5 star
4 star
3 star
2 star
1 star
Most relevant
