DJI Goggles RE Racing Edition 5 Inches Head Tracking FPV Glasses for DJI Mavic Pro/Spark/Phantom 4/Inspir 2 - Black

Brand: DJI
Item Name: DJI GOGGLES RE
Weight (Typical): 502g
Headband: 500g
Goggles Size:19.5 X 15.5 X 11cm
Headband (folded): 25.5 X 20.5 X 92cm
Screen Size: 5-inch X 2
Screen Resolution: 3840 X 1080(Single Screen: 1920 X 1080)
Transmitter Power (EIRP): 2.4 GHz: 25.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC) 
5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 18.5 dBm (SRRC)
Live View Modes: 1080p30, 720p60, 720p30
Video Format: MP4 (H.264)
Supported Video Play Format: MP4, MOV, MKV 
Video format: H264
Audio format: AAC-LC, AAC-HE, AC-3, DTS, MP3
Battery Capacity: 9440 mAh
Operating Temperature Range: 32° To 104° F (0° To 40°C)
Charger Input: 100-240 VAC,50/60 Hz,0.5A
Output: 5V 3A/9V 2A/12V 1.5A

DJI OCUSYNC AIR SYSTEM
Air Unit: 43.7g
Camera (cable included): 18.2g 
Pagoda Antenna: 9.4g
Cylindrical Antenna: 9.4g
Dipole Antenna: 4.2g
Dimensions Air Unit: 72 X 33 X 14mm
Camera: 29.4 X 28.2 X 22.6mm

DJI OCUSYNC CAMERA
Communication Frequency: 2.4 GHz/5.8 GHz
Transmitter Power (EIRP): 2.4 GHz: 22.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC) 
5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 25.5 dBm (SRRC)
Live View Modes and Min. Latency: 960p50:70ms / 720p60:60ms / 480p50:50ms
Max. Transmission Distance 2.4 GHz: 7km(FCC) / 4km(CE) / 4km(SRRC)
Max. Transmission Distance 5.8 GHz: 4km(FCC) / 0.7km(CE) / 4km(SRRC)
Recommended Frequency Band: 5.8GHz / CE:2.4GHz / SRRC:5.8GHz
Video Format: MP4 (MPEG4)
I/O Interface: S.Bus, Micro USB, PPM, UART, MMCX, Micro SD card slot
Supported Flight Control System: F3, F4, KISS, NAZE
Supported Remote Controller: X9D(Frsky)/DEVO 10(Walkera)/T8FG(Futaba)/T14SG(Futaba)/WTF09sll(WFLY)/                                            AT9S(RadioLink)
Operating Temperature Range: 32°To 104°F(0°To 40°C)
Input Power: 9 - 16.8V (3S-4S)
Sensor: 1/3 CMOS
Effective pixels: 1.2M
Lens: 2.65mm f/2.0
Lens Group: 6G + IR
Shutter: Global Shutter
ISO: 100 - 3200
FOV: 148°(D) / 111°(H) / 79.5°(V)

A DJI Goggles - Micro USB OTG Cable is required when working with Spark.
A DJI Goggles - HDMI (Type A) Female to HDMI (Type C) Male Adaptor is required when working with Inspire 1 series.

1 x DJI Goggles Racing Edition
1 x Charger
1 x Wire Clip
2 x Pagoda Antenna(SMA Interface)
1 x Reversed SMA Connector
1 x Micro USB Cable
1 x HDMI Cable
1 x Cleaning Cloth