VTOMAN V2500 2500A Car Jump Starter, 15V DC Port, 3 LED Flashlight Modes, 12V Car Up to 8.0L Gas or 6.0L Diesel Engine

Highlights

Compact and Powerful Jump Starter

The portable car jump starter power bank delivers a peak current of 2500A, allowing it to easily jump-start a dead 12V battery in seconds. No assembly is required; simply clip the jumper cables to the positive and negative terminals of your vehicle, turn on the power switch, and start any 12-volt car, SUV, truck, motorcycle, motorboat, or lawn mower (suitable for up to 8L petrol and 6L diesel engines). On a full charge, it can provide up to 35 jump starts.

Fast Charging 3.0 Power Bank

more than a car jump starter power pack, is also a compact charger power bank. Equipped with two USB ports (one 5V/2.1A), another fast charging 3.0 USB port (5V/9V/12V, Max 18W) offers the fastest charging speed and is compatible with almost all USB chargers, including mobile phones, iPads, tablets, cameras, Kindles, GPS and etc. Charging time is up to 3 times faster than standard battery technology.

Supports 15 V DC Output

the battery booster car jump starter not only supports the car emergency start but also a variety of outputs within 15 V. VTOMAN V2500 battery booster jump starter equipped with a 15V 10A output, can be car air pumps, car vacuum cleaner, car fridge and other 12V car accessories.

Multi-function LED Torch

the car jump starter power bank has a built-in LED torch with 3 modes: stable, SOS, and strobe. When you are outdoors, the LED torch can provide more convenience in the dark. Can be used in various emergency situations, and is a great companion for camping, travel, and outdoor adventures.

10 Safety Protection System

the VTOMAN portable car battery booster jump starter smart cable has 10 types of safety protection built in. (Overcharge, Over Voltage, Short Circuit, Over Current, Flood, Spark Protection, Reverse Charge, Reverse Polarity, High and Low TEMP, AI Software Monitoring).

Steps of Use

please check the power before use. If less than 75%, charge the device before attempting a jump starter. Steps of use: 1. Connect the intelligent jump leads to the device. 2. Connect the red clamp to the POS (+) pole of the vehicle battery and the black clamp to the NEG (-) pole of the vehicle battery. 3. Start the vehicle. 4. Remove the jumper.

Specification