- Shipping Company Estimated Delivery Time Shipping Cost
Turn your hose faucet into a programmed sprinkler system with this automatic digital water timer! This water timer takes care of watering the plants for you whether you need to water on specific days of the week of just every few days, which is ideal for irrigation in your lawn, garden, yard, greenhouse, flowerbed, etc. Up to 6 programmable cycles can be set up per day. No more dead plants or soggy lawns because you forget to water them or forget to turn the water off. This timer allows simple, easy installation and programming. Start time, run time and cycle can be set in advance. Run time ranges from 1 minute to 10 hours, and watering frequency can be adjusted from 1 day to 15 days. Moreover, you can also choose manual mode. Additionally, the tap timer also includes a terminal output which can be connected with a rain sensor (not included), so that the tap timer will shut off automatically when rainy days come up. The soil moisture sensor is equipped with 5 meters long cable connecting to the water timer or controller and send the moisture. The soil moisture sensor is water-resistant and intended for outdoor use. You can insert the pointed panels into the ground. When it detects that the soil is wet enough, the program that was originally set to be watered will be skipped to prevent overwatering and save water. Simply set the control knob to one of three levels to accommodate your plants' particular moisture requirements.
- Water timer
- Colour: Grey, blue and black
- Material: ABS
- Dimensions: 7,5 x 9,5 x 20,5 cm (L x W x H)
- Working water pressure: 0,5-8 bar
- Flow range ≥ 40 L/min
- IP rating: IP68
- Operating temperature: 5°C - 60°C
- Working voltage: 3 V
- Easy-to-read LCD display
- With single outlet
- Suitable for 3/4" (20mm) tap/faucet
- Battery required: 2 x AA alkaline battery (not included)
- Moisture sensor
- Cable length: 5 m
- Humidity range: 25%, 45%, 65%
- Delivery contains:
- 1 x Water timer
- 1 x Moisture sensor
