GARRETT Super Wand Scanner-Hand Held Metal Detector Audible & Red Led Or Vibrate(SS110348)

Highlights

• This is the new super scanner v with vibrator
• Trust the original, patented design of garrett's superscanner, which is the world's most recognized hand held metal detector in the world.
• The industry leader for more than 20 years, the super scanner is backed by ongoing state of the art garrett engineering
• Ultimate sensitivity: detects medium sized pistol form 9" distance, large knike from 6", razor blades and box cutters from 3" distance, foil wrapped drugs and tiny jewerly from 1"
• Self calibrating: digital microprocessor technology eliminates the need for periodic sensitivity adjustments
• Rugged, hight impct abs case withreinforced coil compartment. Exceeds mil-std-810f ( drop test ) method 516.5, procedures ii and iv
• Large 10" scan surface for quick, through scanning.
• No tools required to changed standard 9 v battery ( included ) optional rechargeable kit available.
• Sharp audible alarm and bright red led light indicates the detection of metal.
• Momentary push botton helps temporarily eliminate detection of nearby ambient metal such rebar, metal walls

Specification

• Hand held Garrett metal detector with 360 degree detection and comfort grip.
• Choice of alarm: audible and red LED or vibrate with red LED
• 9 volt battery included.
• Size 19"L, 1 lb.
• Operating temperatures: -35 of ( -37 oc ) to 158 of ( 70 of )
• Weight: 14 oz ( 400 g )

Detail

What's in the box?

• 1 x Hand Held Metal Detector
• 1 x User Manual

How to Use a Hand-Held Metal Detector?

• Different metal detectors use the same basic electrical devices to detect the presence of metal. An oscillator creates radio waves along a coil of wires. The receiver in the metal detector picks up the radio waves and produces a beeping noise. When a metal object passes near the wire coils, a magnetic field is created that alters the radio waves being sent to the transmitter and also alters the beeping noise, indicating to the user that metal has been found. Operators use hand-held metal detectors to find metal in many situations, especially for security purposes.
• Put batteries in your hand-held metal detector. Most take 9V batteries in the rear end of the handle of the metal detector.
• Turn on your metal detector using the "On" and "Off" button that is usually located on the handle close to the scan area. Not all hand-held metal detectors are the same. Fisher, for example, has a three-way power button, while Whites Electronics has a traditional On/Off button.
• Check that the indicator light is on, showing that the metal detector works. If your metal detector does not have an indicator light or any other indicator, wave the metal detector over an obviously metal object, such as your car, and wait for the signal that the metal detector is on. The signal could be a beeping sound, a vibration or a red LED light turning on.
• Set any special features on your hand-held metal detector, such as plug-in ear phones, volume controls or sensitivity controls.
• Hold your hand-held metal detector as close as possible to an area where you need to search for metal. The closer the metal, the clearer the signal.