- Shipping Company Estimated Delivery Time Shipping Cost
Trusted Shipping Partners: 
and more
Highlights
The 5th-Generation Hub Motor (540W x 2)
Champion of torque and efficiency
Equipped with the latest 5th-Generation hub motors, insane power efficiency and quietness. More convenient to remove and replace the sleeves.
LY-FOC 1.0 ESC
Field-oriented control, now comes with MEEPO
The LY-FOC 1.0 ESC allows the board to be maneuvered much more precisely. It will sample input from the remote as well as the motor 1000 times per second (every millisecond), making the ride much smoother and much more beginner-friendly.
Push-Off Auto-Start
No more bending over.
Turn on your electric skateboard by turning on the remote, and then push off the ground with one of your legs. You can enjoy the convenience of turning on the board without needing to bend over.
Shredder 45° Downhill Trucks
Shreds hills like nothing else.
After 6 years of intensive R&D looking into the consumers ride experiences, our Shredder V4S has been finely tuned. There are major upgrades to durability, responsiveness as well as some grand aesthetic improvements. All while keeping their 45 degree DNA which has the perfect balance between agility and stability.
The MEEPO M4S Remote
Convenience meets security
This remote allows you to control the acceleration & braking modes independently. Its large screen enables you to see an overview of the status of your board without risking your safety. Additionally, it ensures the stable and secure connection between the board and the remote, even in the harshest of signal interferences.
Powerful Motor
Fast acceleration and good grade ability.
Specification
| General |
Brand: MEEPO |
| Specification | Max Speed: 46KPH/29MPH Range: 30KM/18 miles Gradeability(%): 0.3 Motors: 540W*2 Remote: M4S Charge Time: 2.6H Battery: 10S2PP42A/288WH Weight Limit: 150KG/330 lbs ESC: LYFOC 30H Shredder: 7 Inch Meepo Shredder Front Wheels: 90*62mm Brake Recharge: 0.22 Board Material: 8 Canadian Maple layers and 1 fiberglass layer Charger: 42V/3A |
| Weight & Size | Product Weight: 9.7KG Package Weight: 12.2KG Product Size(L x W x H): 91*23*12cm Package Size(L x W x H): 96*33*15cm |
| Package Contents |
1 x MEEPO ShuffleS ER Electric Skateboard |
Customer Photos
Customer Videos
Customer Reviews
Questions & Answers
FAQ
1. Please wear a helmet including other safety protective gear all the time while riding. Ride safely and obey your local laws and regulations.
2. If you want to store the bicycle/scooter for an extended period, make sure the battery is charged well above 50%. Be mindful that the battery is stored at a dry and safe area.
3. Please do not charge the battery indoors.
Q: How to maintain my skateboard after rain?
A: If you accidentally ride in the rain or on wet surfaces, wipe off all the water on the surface of your board, especially in the charging port, and do not charge your board until it gets dry. Then, idle motors of your board for 10 minutes in order to dry the inside of motors for avoiding rusts.
Q: What is the weight range for riders
A: The maximum weight range of a Meepo boards is 330 lbs / 150 kg. However, we recommend is 265lbs / 120 kg or lower to ensure the performance of the board is not impacted.
Q: How do I take care of my Meepo Board?
A: Store your board in a dry area and charge your board at least once a month to avoid unrecoverable battery damage.
Q: What is the range and what would affect it?
A: Some factors that could affect the range: Rider's weight, terrain, wind resistance, temperature, speed, and brake mode.
Q: Why the battery range isn't power as usual?
A: The battery power will lose some power if it has been used many times, it is very normal for all the electric product.
Q: How do I check the battery voltage?
A: While the battery is FULLY charged, check out the battery voltage following below technical support video:
https://www.youtube.com/watch v=6QK83ji0sGQ&list=PLEkd_tyWYYKc6onPADzqK_YBTIBSxKlWn&index=3&t=0s
PS: Multimeter is necessary for all electric skateboards, not only for MEEPO board. The Multimeter should be set as 200V.
Q: My board is not turning off, what can I do?
A: Please do a test for us, so we could know if it is the problem of your ESC.
Here is an instruction:
1.Turn off the remote first.
2.Leave the board alone for about 15 minutes.
3.See if the board is able to turn off by itself. If the board doesn't turn off after 15 minutes, that means you would need a new ESC.
Q: One of my motors isn't working well, waht can I do?
A: If the motor is not working well, please open the ESC case to make sure all wires are connected well.
