Raspberry Pi RPi Model B+ (Package D) Accessory Kits ARPI600 + MQ-5 Gas Sensor + Color Sensor + Flame Sensor + Metal Sensor etc

Highlights

• This package D includes : Raspberry Pi Model B+, ARPI600, MQ-5 Gas Sensor, Color Sensor, Flame Sensor, Metal Sensor, Hall Sensor, Infrared Reflective Sensor, Laser Sensor, Moisture Sensor, Rotation Sensor, Sound Sensor, Temperature-Humidity Sensor, Tilt Sensor, UV Sensor, Liquid Level Sensor etc.

Specification

Raspberry Pi Model B+ Features:

1. Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU
2. GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
3. GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24 GFLOPs of general purpose compute and features a bunch of texture filtering and DMA infrastructure
4. 512MB RAM
5. Boots from Micro SD card, supports Linux distros such as Fedora, Debian and ArchLinux
6. 10/100 wired Ethernet
7. HDMI output
8. USB 2.0 interface x 4
9. 4-pole 3.5mm stereo audio jack with composite video output
10. Micro SD card slot
11. Powered by 5v micro USB
12. Camera connector
13. 40-pin 2.54mm expansion pinheader
14. Dimensions: 85mm x 56mm x 17mmARPI600 Features
15. Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
16. XBee connector for connecting various XBee modules
17. Sensor interface for connecting various sensors
18. Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
19. Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
20. Onboard RTC

    ARPI600 Product introduction

21. Arduino connector : for connecting Arduino shields
22. ICSP interface : Arduino ICSP
23. XBee connector : for connecting XBee communication modules
24. Sensor interface : for connecting sensors
25. Raspberry Pi connector : for connecting Raspberry Pi
26. USB TO UART
27. TLC1543 : AD converter
28. PCF8563 : RTC
29. CP2102
30. 32.768KHz crystal : for RTC
31. Power indicator
32. XBee state LED
33. XBee and Arduino interface RESET button
34. XBee EASYLINK button
35. RTC battery holder : for CR1220 button battery
36. TLC1543 reference voltage configuration jumper
37. RTC jumper
38. UART jumper
    • when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    • when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    • when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
39. Arduino AD selection jumper
    • short 2 and 3 : Arduino A0-A5 as AD input
    • short 1 and 2 : Arduino A0-A5 as digital control
40. Arduino I2C selection jumper
    • short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
41. Arduino SPI selection jumper
    • short 1 and 2 : Arduino D11-D13 as SPI control (default)
    • short 2 and 3 : Arduino D11-D13 as digital control

What's in the box?

• 1 x Raspberry Pi Model B+
• 1 x ARPI600
• 1 x MQ-5 Gas Sensor
• 1 x Color Sensor
• 1 x Flame Sensor
• 1 x Metal Sensor
• 1 x Hall Sensor
• 1 x Infrared Reflective Sensor
• 1 x Laser Sensor
• 1 x Moisture Sensor
• 1 x Rotation Sensor
• 1 x Sound Sensor
• 1 x Temperature-Humidity Sensor
• 1 x Tilt Sensor
• 1 x UV Sensor
• 1 x Liquid Level Sensor
• 3 x 3-pin custom connector jumper wire
• 4 x 4-pin custom connector jumper wire
• 1 x 5-pin custom connector jumper wire
• 1 x USB Type A Plug to Micro B Plug Cable
• 1 x USB type A plug to mini-B plug cable
• 1 x RPi screws pack (2pcs)