Frame Kit
Model: X120
Wheelbase: 116mm
Bottom Plate Thickness: 4mm
Material: 3k Carbon Fiber and plastic
Weight: 20g
Flight Controller:
MPU: MPU6000-SPI
CPU: STM32F405RGT6, dual 8K.
Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A
Size: 25x25mm board
Installing Hole: 20x20mm, mounting holes (M2)
Weight: 2.3g
Support Subs/PPM/DSMX receiver
ESC
Input Voltage: 2-4S Lipo battery
Constant Current: 20A
Burst Current: 30A
BEC Ouput: NO
Firmware: BLheli_S
Size: 27x27mm (main board); 27x31mm ( including pad)
Installing Hole: 20x20mm, M2
Weight: 4g
MOS Tube: TOP QUALITY MOSFET
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150/300/600, forward and reverse
Motor
Model: ST1106
Item Name: 1106 4500KV 3-4S Brushless Motor
Propeller
Brand: GEMFAN
Item Name: 2540 2.5 Inch 3-Blade Propeller
Quantity: 2 CW & 2 CCW
Color: Red
Transmitter:
Output power: 25/100/200mW switchable
Control mode: button OR Channel changes and Pitmode setting through PWM
BAT: 7-26V, BEC 5V @ 1A
200mA----200mW
Video system: NTSC/PAL
Antenna: RP-SMA
Frequency: 5.8GHz 5 bands 48channels, with Raceband: 5362-5865 MHZ
Size: 24x24mm (LxW)
Mouting Hole: 20x20mm
Weight: 2.4g
Camera
Brand: Runcam
Model: Nano 2
Item Name: 700TVL 1/3 CMOS FPV Camera
Image Sensor: 1/3" CMOS
Horizontal Resolution: 700TVL
Lens: 2.1mm(M8) FOV 155°
Signal System: NTSC / PAL
S/N Ratio: more than 50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power: DC 3-5.5V
Current: 110mA@5V
Housing Material: ABS
Net Weight: 3.2g
Dimension: 14x14x16mm ( LxWxH)
Recommend Lipo Battery : 3-4S 400-500mAH 30C Lipo with XT30 Plug ( NOT Included)
|