Anycubic Ace Pro for Anycubic Kobra S1 Series

Highlights

Anycubic ACE Pro: Smart Multi-Color Printing, Print in 4 to 8 Colors

• RFID Sync
• Dries while it Prints in Multi-Color
• Filament Backup
• Co-Created with Pantone Color Institute

Active Drying Function for More Printing success

ACE Pro uses a dual 200-watt PTC heating element for active and even drying of your filaments during the printing process. The heating module is supported by two powerful fans that ensure hot air circulation. Tip: The interior temperature can be set up to 55 °C with optimal humidity.

Drying During Printing or Filament Storage

The drying function can of course be used throughout the entire printing process to ensure that moisture-free filaments are always available. However, thanks to the Sealed Space Design, the Color Engine Pro can also be used for the safe and careful storage of filaments.

Anti-tangle Design

The Anycubic Color Engine Pro is connected to the extruder in parallel through four output tubes. Since each of the filament slots has its own output line, when changing colours, not all of the filament wire in the output line needs to be wound back to the spool, but only the part that is fed back into the inner chamber of the extruder. This reduces the possibility of spool entanglement on the one hand and prevents the material from running out in a moment on the other.

Smart Multi-Color Printing -- Print in 4 to 8 Colors

• RFID Sync
• Dries while it prints in Multi-Color
• Filament Backup
• Custom 4 Colors

All New Anycubic Color Engine Pro

A New Level of Multi-Color Printing

Unleash Creativity in 4 Colors

Start printing in 4 colors and personalize your creations with ease.

Print up to 8 Stunning Colors

Immerse yourself in a world of vibrant colors, and fully explore your creative ideas in multicolor.

RFID Sync

Filament colors are matched precisely for more efficient printing.

Stay Dry in Any Scenario

Filament Drying at all Times

The maximum power of the dual PTC heating system is 200W. It efficiently circulates air and maintains a consistent temperature of up to 131°F, keeping filaments dry at all times.

Drying while Printing

Print and dry simultaneously for up to 24 hours, ensuring the filament stays dry from the inside out for superior printing quality.

Optimal Storage

Filaments are maintained in optimal condition in the sealed case.

Nozzle Clog Detection, Minimizes Filament Tangling.

The ACE Pro delivers filament individually through four tubes, shortening filament retraction length during color changing and filament backup. The ACE Pro also supports auto loading and unloading the filaments to eliminate messes and tangling. The built-in buffers detect nozzle clogs, pausing the print and alerting users promptly to effectively protect the machine.

Filament Backup

The Anycubic Color Engine Pro makes full use of each filament spool, automatically transitions to the next spool of the same color and material, and effectively boosts printing efficiency.

Specification