- Shipping Company Estimated Delivery Time Shipping Cost
Turn your hose faucet into a programmed sprinkler system with this automatic digital water timer! This water timer takes care of watering the plants for you whether you need to water on specific days of the week of just every few days, which is ideal for irrigation in your lawn, garden, yard, greenhouse, flowerbed, etc. Up to 6 programmable cycles can be set up per day. No more dead plants or soggy lawns because you forget to water them or forget to turn the water off. This timer allows simple, easy installation and programming. Start time, run time and cycle can be set in advance. Run time ranges from 1 minute to 10 hours, and watering frequency can be adjusted from 1 day to 15 days. Moreover, you can also choose manual mode. Additionally, the tap timer also includes a terminal output which can be connected with a rain sensor, so that the tap timer will shut off automatically when rainy days come up. The wired rain sensor can be pluged into water timer, which conserves water by preventing irrigation during or after sufficient rainfall. This rain sensor for water timer can be adjusted for detection of 5 precipitation levels at 3mm, 6mm, 12mm, 19mm, 25mm. Depending on the settings, this sensor will stop the timer if it already has rained enough.
- Water timer
- Colour: Grey, blue and black
- Material: ABS
- Dimensions: 7,5 x 9,5 x 20,5 cm (L x W x H)
- Working water pressure: 0,5-8 bar
- Flow range ≥ 40 L/min
- IP rating: IP68
- Operating temperature: 5°C - 60°C
- Working voltage: 3 V
- Easy-to-read LCD display
- With single outlet
- Suitable for 3/4" (20mm) tap/faucet
- Battery required: 2 x AA alkaline battery (not included)
- Rain sensor
- Size: 14 x 21 cm (W x H)
- Precipitation level: 3, 6, 12, 19, 25 mm
- Delivery contains:
- 1 x Water timer
- 1 x Rain sensor
