FNIRSI DPOX180H Digital Phosphor Oscilloscope 2 in 1 Dual-channel, 180MHz Bandwidth, DDS Signal Generator, US Plug - Blue

Highlights

1. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz.
2. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used. The waveform display effect is good.
3. With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability.
4. The time-based system includes a ZOOM time base for easy analysis of digital protocol signals.
5. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP.
6. Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform.
7. The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise.
8. 20M hardware bandwidth limit, can filter out noise above 20MHz.
9. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals and protocol signals.
10. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz.

Specification