- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
- Perfect for beginners learning robotics, electronics and Arduino programming.
- Build a Robot Tank or a Three-Wheeled Robot Car.
- Aluminum extrusion structure.
- Easy wiring, no soldering required.
- This Kit is a great choice for learning robotics, electronics and Arduino programming. It contains mechanical parts and electronic modules for you to start exploring the robot world, it can be used to build a robot tank or a three-wheel robot car.
- With the following electronic modules : Me Orion, ultrasonic sensor, IR remote controller and IR receiver, an IR controlled robot or an ultrasonic obstacle-avoiding robot can be build. The Me series electronic modules are easy-to-use, very friendly to beginners.
Specification
| General | |
|---|---|
| Brand | Makeblock |
| Quantity | 1 Piece |
| Color | Blue |
| Specification | |
| Note | The battery of IR Remote Controller will be taken to assure safe transport, you may need to buy it by yoursalf. The battery size is CR2025. Sorry about the inconvenience |
| Package Contents | |
| 1xMakeblock Starter Robot Kit | |
Useful Links:
|
Instruction |
|
|
FAQ |
|
|
Arduino programming |
|
|
Arduino Library |
|
|
Scratch for Robot |
Part List :
|
1 × Beam 0824-96 |
2 × Threaded Shaft 4x39mm |
4 × Plastic Rivet R4060 |
|
1 × Beam 0824-128 |
2 × Shaft Collar 4mm |
4 × Plastic Rivet R4120 |
|
2 × Beam 0824-144 |
4 × Flange Bearing 4x8x3mm |
4 × Plastic Ring 4x7x2mm |
|
1 × Plate 3x6 |
1 × HEX Screwdriver 2.5mm |
|
|
1 × Bracket 3x3 |
1 × Cross Screwdriver 3mm |
1 × Me Ultrasonic Sensor 3.0 |
|
1 × Bracket P3 |
2 × HEX Allen Key 1.5mm |
1 × Me IR Receiver V2.1 |
|
2 × DC Motor-25 Bracket B |
1 × Wrench 7mm&5mm |
1 × New Me IR Remote Controller |
|
1 × Caster Wheel |
22 × Socket Cap Screw M4x8-Button Head |
1 × 6P6C RJ25 cable-20cm |
|
2 × DC Motor-25 6V/185RPM |
14 × Socket Cap Screw M4x14-Button Head |
1 × 6P6C RJ25 cable-35cm |
|
2× Shaft Connector-4mm |
4 × Countersunk Screw M3x8 |
1 × USB 2.0 A-Male to Micro B-Male Cable |
|
4 × Timing Pulley 90T |
4 × Headless Set Screw M3x5 |
2 × Base Bracket B |
|
2 × Tyre 68.5x22mm |
3 × Nut M4 |
1 × Battery Holder for (6)AA |
|
38 × Track |
1 × Nut M8 |
|
|
38 × Track Axle |
6 × Nylon Stud M4*30 |
|
