SCULPFUN: S30 Pro 10W Laser Module Kit

Note

1. Because of the powerful laser of the S30 Pro, it is forbidden to run the engraving machine unattended. Pause it if you're not around.

2. For detailed machine instructions, please refer to the manual for parameter settings.

3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.

4. Do not touch the laser with your hands, otherwise, you may burn your hands.

5. Please avoid a strong impact on the machine.

6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attention.

7. Do not use the laser directly on any specular reflection object, which may cause injury to the operator or burn the laser.

Highlights

Built-in High-pressure Air-assisted Nozzle
It is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean.

Replaceable Protective Lens
This laser module adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than that of other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Ultra-fine and High-density 10W Laser 
The laser power of the S30 Pro is increased to 10W, which is twice that of the S9. But getting the same 0.08mm focus ultra-fine laser beam as the S9 means that the S30 Pro has higher energy density, stronger cutting penetration, and engraving capabilities.

Universal 12V/PWM Modulation Board
It uses a common 12V/PWM modulation board, which can be adapted to common GRBL or CNC motherboards.

Faster, Stronger & Cleaner
Combining advanced high-speed air assist and a 10W high-energy-density laser, the S30 Pro reflects industrial-grade wood cutting performance: first, the cutting efficiency is greatly improved, and the cutting is faster; second The cutting penetration is stronger, and many kinds of high-density wood can be cut; the third is that the cutting surface is cleaner, and the powerful airflow blows away the residue so that the surface of the cutting object is free of any stains.

Highly Compatible Design
It can be installed on various brands of machines, such as SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, ORTUR (12V version) laser engraving machines, or other DIY-type machines.

Detachable Laser Protection Cover
The S30 Pro Laser Module is equipped with a detachable protection cover, which will not dazzle even without glasses. Also if you don't need it, you can easily disassemble it.

Specification