SQ8 Mini Car Video Recorder Full HD Sports DV Camera 1080P Night Vision Car DVR Loop-cycle Recording Motion Detection - Black

Note

The product must be plugged in card ( high-speed authentic memory card ) can be used. Please don't plug into USB charger, then plug in TF card after starting up the product, in such a condition, it is easy to delete our software.

Highlights

1080P Full HD Car DVR Camera Recorder: High definition full HD1080P.

Compact Design: Portable handheld.

With a 360 degree rotating stent: It can be used as a car camcorder. Auto record when power on, auto shut off and save the videos when power off. Support loop recording(please see the manual).

Record in High-quality images and high-definition video: Built-in lithium battery can last for up to 100 minutes.

Support TV out: TV monitor video connection.

First-line and three-use: USB with TV line, 1: can be inserted into the computer to charge the machine and data transmission. 2: TV OUT screen display can be inserted. 3: External DV 5V can be inserted and recorded.

720P video does not flash: Click the ON OFF button to turn on the computer, turn on the blue light, click on the switch once, the blue light blinks 3 times to turn off the 720P video, the video light does not prompt, and the 5-minute segment automatically saves the continuous video, loop coverage, and then Tap the switch button once to stop recording and return to the blue steady standby mode.

1080P video does not flash: Turn on the blue light on the standby mode, press the mode button once, the red and blue lights will be on the 1080P video mode, and then press the switch button one time. The blue light will turn on and the red light will flash off for 3 times. It will be 1080P video for 5 minutes. A segment is automatically saved for continuous recording, and the cycle is overlaid. Press the switch once again to stop recording and return to standby mode.

Infrared light switch off: Turn on: Standby mode in any mode, press and hold ON/OFF for 2 seconds or so Red light blinks 2 Infrared night light turns on, you can watch the video at night. Off: Turn off the infrared night-vision light. In any standby mode, press and hold ON/OFF for about 2 seconds. Red blinks 3 times to turn off the infrared night-vision light.

Side of the record: Insert the T card, plug in the USB TV cable externally, connect an external 5V USB power supply, or charge Po. The camera directly enters the 720P video camera mode. There is no manual stop until the card is full or no power is recorded. You can also manually stop the video recording and switch to any mode.

TV OUT mode: Connect the USB TV cable, and connect the TV screen to the TV screen. You can see the image on the TV screen. You can use the camera, video, and motion detection at this time.

Reset: The machine crashed, the button was invalid, and it could not be used normally. You can use the pointed object to insert the reset hole into the camera to reset it and use it after reset.

Shutdown: In the stop (video, camera, motion detection) function mode, you need to shut down, long press the ON/OFF button for about 6 seconds, and you see that the red and blue lights are turned off. Or in the standby mode without using any function, it will shut down for 1 minute.

Specification