ATOMSTACK AIC1 Auto Air Assist Control System, WiFi Offline Work, 32-bit Motherboard, for S30 Pro/S20 Pro/S10 Pro/A5 Series

Highlights

M7 Automatic Control Air Assist Switch

When using the AIC1 air assist control kit, you can use the Lightburn software M7 mode to automatically switch on and off the air assist according to the engraving or cutting, saving energy and enhancing the working life of the air assist.

Safety Protection

AIC1 controller with emergency stop and reset buttons can give you a safer working experience. You can also choose the touch control panel to achieve offline engraving.

32-bit High-Speed Motherboard

The AIC1 Air Assist Kit is equipped with the latest Atomstack high-calculus motherboard, which boasts faster instruction processing speeds and can increase engraving productivity by up to 30%.

WiFi Offline Work

AIC1 motherboard with WiFi module, you can upgrade the WiFi offline control function. You can control the machine offline using the Atomstack mobile app.

Easy Installation

Quick installation in three minutes, and you do not need to open the control box wiring. You only need to replace the original power supply cable to install it successfully, and you can also avoid machine failure caused by the wrong installation.

High Adaptability

Atomstack Air Assist Control Kit can be adapted to all Atomstack frame laser engraving machines, such as A5 Pro/ A5 Pro+/A5 M50/ X7, X7 Pro/A10 Pro/S10 Pro, X20 Pro/ A20 Pro /S20 Pro, X30 Pro/ A30 Pro/ S30 Pro, etc. (requires the purchase of Lightburn software).

Specification