Categories

Artillery Sidewinder X2 3D Printer, ABL Auto Calibration, Titan Direct Drive Extruder, 180-240 Degrees, 300*300*400mm Larger Build Volume

Ship to:
United States
Select the desired shipping method
Shipping Company Estimated Delivery Time Shipping Cost
*Please note: the shipping costs are only estimates; the actual shipping price will be shown on the order page.
0 item(s) added
View CartContinue Shopping

Highlights

95% Pre-Assembly

DIY all-in-one structure, the Sidewinder X2 comes 95% pre-assembled, which makes installation easy as can be. 3 minutes to complete assembly.

Fast Printing Speed

The print speed of Artillery Sidewinder X2 can reach up to 150mm/s, and the 0.4mm direct drive extruder makes high-quality print, especially for flexible filament.

Automatic Bed Leveling

With matrix automatic bed leveling, Intellisense, and precise testing, the device supports dynamic leveling compensation and frees you from complex manual leveling, which proves to be efficient and intelligent.

Synchronized Dual Z System

There are 3 inductive sensor end stop separately set on the XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, the synchronized dual Z system greatly increases its printing stability.

Large Build Volume & Color Touchscreen Control

Sidewinder X2 3D printer features a 300 x 300 x 400mm build volume and color touchscreen control. It is simple and easy to understand the operating interface, bringing you more possibilities for creating your 3D printings.

Tempered Glass Platform & AC Heat Bed

The printer has a direct drive extruder and a fast-heating AC heat bed with built-in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. AC heat bed can be heated to 110 Celsius in 2 minutes. The tempered glass platform makes print more smoothly and adheres well.

Resume Printing Function

The product has the function of detecting filament runout and power interruption and resumption of printing, giving an alarm before filament runout; it is featured by continuing usability after power recovery, versatile functions, and deserves trust in use.

Exclusive Ultra-quiet Stepper Driver

The ultra-quiet system, assisted by the exclusive ultra-quiet stepper driver, undergoes high-load safety testing during which the machine operates at low decibels throughout the entire process, thus realizing quiet printing.

Artillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-AssembledArtillery Sidewinder X2 3D Printer Auto Leveling Stepper Drivers TFT Touch Screen 300*300*400mm 95% Pre-Assembled

Specification

General Brand: Artillery
Type: 3D printer
Model: Sidewinder X2
Color: Black
Specification Build volume: 300 x 300 x 400 mm
Layer resolution: 0.1mm – 0.35mm
Filament diameter: 1.75mm
Supported materials: PLA, ABS, Flexible PLA, Wood, PVA, HIPS
Frame: Aluminum Extrusion
XYZ resolution: 0.05mm, 0.05mm, 0.1mm
Nozzle diameter: 0.4mm
Nozzle heat up time: < 3 minutes
Build plate heat up time: 80C in less than 2 minutes
Operating sound: < 70dBA
Power consumption: 110V 700W max (w/ heated bed turned on)
Control board: Ruby 32
Product dimensions: 21.65 x 15.94 x 34.25 in (with spool holder)
Maximum Print Speed: 150 mm/s
Maximum Travel Speed:250mm/s
Maximum Build Plate Temperature: 130˚C
Connectivity: USB, TF Card, USB Stick
Weight & Size Product Weight: 12.9kg
Package Weight: 16kg
Product Size(L x W x H): 55*40.5*87cm
Package Size(L x W x H): 66.8*50.8*31cm
Package Contents 1 x Artillery Sidewinder X2 3D Printer
1 x Assembly Tool Kit
1 x Assembly Instruction
1 x Assembly Guide

Videos

Customer Photos

Customer Videos

Be the first to Upload A Video of this product!

Customer Reviews

4.94out of 5
5 star 275
4 star 6
3 star 6
2 star 0
1 star 0
Write A Review See all 287 reviews
All (287)
Images (49)
Videos (0)

        Questions & Answers

        FAQ

        Q1: What if my hotend/heated bed starts heating after powering on?

        A: 1. Power off the printer immediately;

        2. The problem was caused by a faulty mosfet on the mainboard, replace the mainboard.

        Q2: What if my printed mold is not sticking to the bed?

        1. Re-level the bed, and make sure to pre-heat both the hotend and bed to the print temperature;

        2. The print bed sticks better with a temperature around 10C higher than the bed temperature suggested by the most manufacturer;

        3. Do not turn off the bed during printing, due to the nature of the coating, it will release the print once it’s cooled down, turning off the bed mid-print will cause the bed to release the print;

        4. You may wipe the print surface with IPA once it’s completely cooled down. Never clean it with any cleaning products.

        Q3: My build plate/Y-axis/platform is not stopping when homing, what should I do?

        A: 1. Do a visual check on the endstop sensor, make sure it’s not crushed by the screw;

        2. With the power turned on, use a piece of metal to trigger the Y endstop sensor, if there’s no red LED lighting up, the endstop sensor is faulty, replace endstop sensor;

        3. Move the platform to the very front of the print and home Y individually, using a piece of metal to trigger the Y endstop sensor right after pressing home;

        a. If the build plate stops, the sensor is working correctly, check if there is anything beneath the bed obstructing its movement;

        b. If the build plate does not stop, the sensor is faulty, replace Y endstop sensor;

        4. If none of the above solves your problem, contact customer services for further assistance.

        Q4: My auto-level sensor does not perform a self-test, how to deal with it?

        1. Power off the printer, and wait till the screen is completely off;

        2. Power on the printer;

        3. If the auto level sensor does not perform a self-test (probing pin comes down and up twice) when powering on, please perform the following:

        a. Gently pull the pin down by hand a repeat steps 1-2;

        b. If the sensor still fails to perform a self-test, contact customer service for a solution.

        Support & Firmware

        Learn More

        Artillery Sidewinder X2 3D Printer, ABL Auto Calibration, Titan Direct Drive Extruder, 180-240 Degrees, 300*300*400mm Larger Build Volume
        We ensure to all customers that GeekBuying will offer the most competitive price online

        Please fill in the blank and submit it if you found this product sold elsewhere for a lower price. We will work with suppliers to lower down the price as much as we can, and you will receive an email afterwards.

        Your trust and support are highly appreciated.

        Item Code: 472837
        The filed E-mail is required

        Please make sure the information above is filled in correctly so we can offer you an accurate discount. Our wholesale department will get back to you within 24 hours.

        Great, You report on this product has been sent to us. Product info will updated if we can work with our supplier to lower the price(Normally in 48 hours Mon- Fri).
        New Users Only
        $60.00 OFF

        Coupon * 5

        5 G-coins

        Instant Discount $5.00

        Easy & secure payments
        Local stock with fast shipping
        Customer support
        14-Day return policy
        Get Now
        Why buy from Geekbuying?
        Amazing offers

        Find best offers for smart gadgets at one place.

        Easy & secure payments

        Pay directly via PayPal or Klarna among other payment options.

        Local stock & fast shipping

        Buy from local stock and ship within 48-hour.

        Customer support

        24-hour customer support for all your queries.

        Connect with us
        You have successfully created your account!

        An activation link has been sent to your email address. Activate your account to access the following:

        If you have not received an activation email, please click below to resend the activation email.

        Resent successfully. Please check your email box to get the discount!

        Resend Activation Email
        Resent successfully. Please check your email box to get the discount!
        Leave Continue