- Shipping Company Estimated Delivery Time Shipping Cost
Trusted Shipping Partners: 
and more
Highlights
Why Creality Space Pi filament dryer?
The Creality Space Pi Filament Dry Box dries the filament while printing, preventing moisture absorption due to external environmental conditions. This helps avoid issues like stringing, clogging, poor adhesion, and layer shifting, ensuring high-quality results.
- Compatible with 1.75mm and 2.85mm filament
- Supports high-speed 3D printers and filaments from the Hyper series (recommended)
- Easy switching between °C and °F
- Safety through the power switch
- Moisture-proof silicone plug,
- Input voltage of 220V 50/60Hz, rated power of 145W
PTC 360-Degree Hot-Air Heating
The dryer quickly heats with a built-in fan, circulating hot air 360 degrees for uniform heating, effectively drying moisture filaments and improving printing results.
Advanced PTC Heating Technology
Our filament dryer employs a unique 110W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, our model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving but also eco-friendly.
LCD Touch Screen
The Creality Space Pi Filament Dryer comes with a 3.7-inch touch screen for easy operation, making it simple for you to track drying conditions.
One-key Set for Filaments
It has one-key temperature settings for different filament types, supporting up to 12 types of filaments, including common and high-performance composites like PLA-CF, PA-CF, and ASA. Of course, you can also freely adjust the temperature between 45 Celsius and 70 Celsius.
48 Hours Timer Function
The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.
Parameter Power-off Memory Function
After a power outage, the machine can restart and still remember your previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.
Creality Space π Filament Dryer
Fast filament selection, efficient drying
- Adjustable temperature 45°C-70°C | Real-time humidity monitoring | Drying time setting 0-48h | 360°PTC hot-air heating | One-key set for 12 filaments
Why We Need Filament Dryer
Wet 3D printing filament can result in stringing, clogging, poor adlhesion, and layer shifting. These problems will be more obvious in high-speed printing scenarios. The Creality Spaceπ Filament Dryer solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the Influence of external environmental factors on the printing of 3D filaments.
Before (Undried Filament)
Stringing / clogging /poor adhesion / layer shifting
After (Dry Filament Dryer)
Smooth / Clean
*Test with PA-CF. Speed 300mm/s
PTC 360° Hot-air Heating
The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving printing results.
Advanced PTC Heating Technology
Our filament dryer employs a unique 110W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a Pl heating pad and often result in uneven drying, our model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving, but also eco-friendly.
PTC Heating
More efficient/Energy saving/Steady heating
One-key Set for Filaments
It has one-key temperature settings for different filament types, supporting up to 12 types of filaments, including common and high-performance composite like PLA-CF, PA-CF, ASA. Of course, you can also freely adjust the temperature between 45°C and 70°C.
LCD Touch Screen
The Creality Space T Filament Dryer comes with a 3.7-inch touch screen for easy operation, making it simple for you to track drying conditions.
48 Hours Timer Function
The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.
Parameter Power-off Memory Function
After a power outage, the machine can restart and still remember your previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.
Compatible with Multiple Diameter Filaments
- 3D printer filament diameter: 1.75 mm
- 3D printer filament diameter: 2.85 mm
Start a New High-Speed Printing Experience
Pair high-speed printers and high-speed filaments to achieve a fast and high-quality printing experience!
Details Make Differences
- Switching between RC and °F
- Power switch - safety
- Silicone plug - moisture-proof
Specification
| Material type | Recommended temperature | Recommended heating time |
| PLA, PLA-CF | 50°C | 4–8 h |
| TPU, PP | 55°C | 4–8 h |
| ABS, ASA, PC | 65°C | 8–12 h |
| PETG, PET, PETG-CF | 60°C | 4–8 h |
| PA, PA-CF | 65°C | ≥ 12 h |
| General | Brand: Creality Type: Filament Dryer Box Model: Space Pi Color: Grey |
| Specification | Input voltage: US 110V 50/60Hz; GB/UK/EUR 220V 50/60Hz Rated power: 145W Temperature control range: 45 - 70 Celsius Heating duration: 0-48h Filament diameter: 1.75mm/2.85mm |
| Weight & Size | Product Weight: 1.15kg Package Size(L x W x H): 315x125x300mm |
| Package Contents | 1 x Filament Dryer Box 1 x User Manual |
Videos
