- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
Why Creality Space Pi Plus filament dryer?
The Creality Space Pi Plus filament dryer dries the filament while printing, preventing moisture absorption due to external environmental conditions. This helps avoid issues like stringing, clogging, poor adhesion, and layer shifting, ensuring high-quality results.
- 2 Rolls of filament can be dried simultaneously
- Compatible with 1.75mm and 2.85mm filaments
- Supports high-speed 3D printers and filaments from the Hyper series (recommended)
- Easy switching between °C and °F
- Safety through the power switch
- Moisture-proof silicone plug
- Double compartment for desiccants for drying when switched off
- Input voltage of 220V 50/60Hz, rated power of 260W
Two Rolls Capacity Design
It contains 2 rolls of 1 kg filaments and is also equipped with 4 filament holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time.
PTC 360-Degree Hot-Air Heating
The dryer quickly heats with a built-in fan, circulating hot air 360 degrees for uniform heating, effectively drying moisture filaments and improving printing results.
Advanced PTC Heating Technology
Our filament dryer employs a unique 110W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, our model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving but also eco-friendly.
LCD Touch Screen
The Creality Space Pi Plus Filament Dryer comes with a 4-inch touch screen for easy operation, making it simple for you to track drying conditions.
One-key Set for Filaments
It has one-key temperature settings for different filament types, supporting up to 12 kinds of filaments, including common and high-performance composites like PLA-CF, PA-CF, and ASA. Of course, you can also freely adjust the temperature between 45 Celsius and 70 Celsius.
48 Hours Timer Function
The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.
Parameter Power-off Memory Function
After a power outage, the machine can restart and still remember your previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.
Creality Space Pi Filament Dryer Plus
- Two rolls capacity
- Adjustable temperature 45°C-70°C
- Drying time setting 0-48h
- 360° PTC hot-air heating
- One-key set for 12 filaments
48 Hours Timer Function
The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.
Parameter Power-off Memory Function
After a power outage, the machine can restart and still remember your previous material and temperature settings, eliminating the need for resetting and allowing for quick drying.
Power OFF: Store the history settings
Power ON: Track the history settings
Compatible with Multiple Diameter Filaments
Supports high-speed consumable printing
Why We Need a Filament Dryer
Wet 3D printing filament can result in stringing, clogging, poor adhesion, and layer shifting. The Creality Space Pi Filament Dryer Plus solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors on the printing of 3D filaments.
Two Rolls Capacity Design
It contains 2 rolls of 1kg filaments and is also equipped with 4 filament holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time.
Double PTC 360° Hot-air Heating
The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving printing results.
Advanced PTC Heating Technology
Our filament dryer employs a unique 110W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, our model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving, but also eco-friendly.
LCD Touch Screen
The Creality Space Pi Filament Dryer Plus comes with a 4-inch touch screen for easy operation, making it simple for you to track drying conditions.
One-key Set for 12 Filaments
It has one-key temperature settings for different filament types, supporting up to 12 types of filaments, including common and high-performance composite like PLA-CF,PA-CF, ASA. Of course, you can also freely adjust the temperature between 45°C and 70°C.
Start a New High-Speed Printing Experience
Pair high-speed printers and high-speed filaments to achieve a fast and high-quality printing experience!
Specification
| Material type | Recommended temperature | Recommended heating time |
| PLA, PLA-CF | 50°C | 4–8 h |
| TPU, PP | 55°C | 4–8 h |
| ABS, ASA, PC | 65°C | 8–12 h |
| PETG, PET, PETG-CF | 60°C | 4–8 h |
| PA, PA-CF | 65°C | ≥ 12 h |
| General | Brand: Creality Type: Filament Dryer Box Model: Space Pi Plus Color: Grey |
| Specification | Input voltage: 220V 50/60Hz Rated power: 145W Temperature control range: 45 - 70 Celsius Heating duration: 0-48h Filament diameter: 1.75mm/2.85mm |
| Weight & Size | Package Weight: 2.5kg Package Size(L x W x H): 34.4x23.2x30cm |
| Package Contents | 1 x Filament Dryer Box 1 x User Manual |
