- Shipping Company Estimated Delivery Time Shipping Cost
This digital water timer allows you to irrigate your garden conveniently and easily, even when you're not at home. It is a digital programmable 2 outlet faucet watering timer that attaches to any garden hose faucet with a standard 26,5 mm thread. The timer gives you full control and maximises water conservation without interrupting the timer’s programme. It has a built-in rain delay setting as well as manual control for added convenience. Made of ABS, this water timer is both waterproof and corrosion-resistant. Thus, it ensures a long service life. The dust cover is included for the LCD display. The soil moisture sensor is equipped with 5 meters long cable connecting to the water timer or controller and send the moisture. The soil moisture sensor is water-resistant and intended for outdoor use. You can insert the pointed panels into the ground. When it detects that the soil is wet enough, the program that was originally set to be watered will be skipped to prevent overwatering and save water. Simply set the control knob to one of three levels to accommodate your plants' particular moisture requirements.
- Water timer
- Colour: White and blue
- Material: ABS
- Dimensions: 22,5 x 13,5 x 7 cm (L x W x H)
- Number of faucet: 2
- Working water pressure: 0,5-8 bar
- Valve type: Impulse solenoid
- For taps with 26,5 mm(G 3/4'') thread
- Water frequency: 30 sec or 1 , 3, 5 minutes or 1, 2, 3, 4, 5, 6, 7 days
- Water duration settings: 10, 15, 20, 30, 40, 45, 50, 55 sec, or 1-360 minutes
- Rain delay settings: 24, 48, 72 hours (when dial at RUN, press +)
- Battery required: 2 x AA alkaline battery (not included)
- Moisture sensor
- Cable length: 5 m
- Humidity range: 25%, 45%, 65%
- Delivery contains:
- 1 x Water controller
- 1 x Moisture sensor
