FullSpeed Toothpick PRO 120mm 2-4S FPV Racing RC Drone BNF - DSMX Receiver

General

Brand: FullSpeed
Item Name: Toothpick PRO
Version: BNF(With DSMX Receiver)

Specification

Weight: 65g (without battery)
Thickness of bottom plate: 2.5mm
Flight controller: FSD412(F411 2-4S FC)5V 2A BEC built-in OSD
ESC: FSD412(1-4S ESC)BLHELI_S 4in1 ESC Dshot600
Motor: 1106 4500KV
Propeller: 2535 4-blade propeller
Camera: Caddx Micro F2 camera with angle adjustable(0°- 45°)
VTX: FSD TX600 Pit/25/100/200/400/600 switchable VTX(support IRC Tramp)

FullSpeed FSD412(F411 FC)Flight controller
Size: 20mm x 20mm x 5mm
Mounting hole: 16mm x 16mm
MCU: STM32 F411
Gyroscope: MPU6000
BEC: 5V/2A
Input Voltage: 2-4S Lipo or 2- 4S HV Lipo
Built-in Betaflight OSD

FullSpeed FSD412 (1-4S ESC)BLHELI_S 4in1 ESC 
Size: 20mm x 25mm x 5mm
Mounting hole: 16mm x 16mm
Firmware: BLHELI_S 
Input Voltage: 1-4S Lipo or 1- 4S HV Lipo
Continuous current: 12A
BEC Ouput: NO

FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter
Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode:BFOSD control(support IRC Tramp)/button
Video system: NTSC/PAL
Antenna: IPEX
BAT: 5V Recommended
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ   
(TX600's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations 
if you need to unlock the frequency.)
Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

Weight & Dimensions

Package Contents

1 x Toothpick PRO frame kit
1 x FSD412 2-4S 12A Flight tower
4 x 1106-4500KV brushless motor 
5 x 2535 4-blade propeller(CW)
5 x 2535 4-blade propeller(CCW)
1 x Caddx Micro F2
1 x FSD TX600 25mW-600mW VTX FPV Transmitter