Garden Water Irrigation Controller with 6 Solenoid Valves

Are you still worried about not being able to water the plants and flowers when you go out, then come and try this intelligent water irrigation controller, which will save your time and effort. The water irrigation timer can control 4, 6, 9 or 11 valves. The watering controller has 6 watering programs and each program has its begin time, end time and running time. The irrigation schedule can be set for each day of the week, with a certain begin and end time. The running time can be from 1 min to 12 hours 59 min as you set. The garden watering computer is AC powered and can be easily operated with just a rotary and push-button for data selection and confirmation. A rain sensor or moisture sensor (delivery not included) connection is available to skip watering and maximize water savings during rainy days or when soil is too wet. A 9 V alkaline battery (delivery not included) is also needed to keep the digital clock showing on screen and the memory of the previous parameter. The solenoid valve comes with the threaded interface for easy and convenient operation. It is designed to be installed both above and below the ground, and can be used with 24 V AC irrigation controller.

• Irrigation controller
• Material: Plastic
• Input: AC 230V, 35VA, 50-60Hz
• Output: AC 24V, 0,8A
• Configuration to 4, 6, 9 or 11 irrigation stations
• 6 watering cycles for each station
• Duration from 1 minute to 12 hours 59 minutes
• Suitable for 1 pump(M) and 1 sensor(R) connection
• Battery required (for digital screen): 1 x 9 V alkaline battery (not included)
• Solenoid valve
• Interface diameter: 2,54 cm (BSP 1")
• Input: AC 24 V
• Delivery contains:
• 1 x Irrigation controller
• 6 x Solenoid valve