ATOMSTACK Maker S30 Pro Laser Engraver Cutter, 33W Laser Power, Air Assist, 0.01mm Engraving Accuracy, Offline Engraving, 32-bit Mainboard, 400x400mm

Highlights

• The World's First 6-core Diode 33W Laser.
• 20mm wood Cutting in One-PASS.
• 10mm Black Acrylic Cutting in One-PASS.
• It can cut 0.05mm thin sheet metal.
• Fixed-Focus, Air Assist.
• 0.01mm Engraving Accuracy.
• Offline Engraving.
• App Connection.
• 400*400mm.

33W Laser Output Power

Atomstack S30 Pro is the world’s first 33W laser output power laser engraver, it has the latest 6*6W laser coupling technology (ultra-fine laser spot size is reduced to 0.08*0.1mm) that can cut 18-20 mm paulownia board and 10mm black acrylic board in one pass and even can cut 0.1mm stainless steel sheet. The high-density laser can easily cut 25mm wood board and 30mm black acrylic board through multiple time works. It can also directly engrave on mirror stainless steel, ceramic, opaque glass, etc.

High Working Efficiency

Compared with a 10W laser engraving machine, S30 Pro has a 200% higher cutting speed and 150% higher cutting depth. Compared with a 20W laser engraving machine, S30 Pro has a 50% higher cutting speed and 25% higher cutting depth.

Upgraded F30 Pro Air Assist Kit

Equipped with F30 Pro, the cutting ability of the S30 Pro is greatly improved, and the cutting accuracy and quality are also greatly optimized.

Newly Updated 32-bit Mainboard

Built-in 256-bit color levels make the engraving result finer and the contrast higher, so that your engraving will not just be black.

Upgraded Laser Module

The new S30 Pro laser module has a built-in tool-free focus module and a built-in air-assist system, without the interference of wires, simple and beautiful. Besides, the laser sintering temperature reaches as high as 3,000 Celsius.

Offline Engraving Supported 

Atomstack S30 Pro is equipped with a terminal control panel that supports offline engraving. You can perform engraving when there is no computer available.

Filter Panoramic Eye Protection

The panoramic-filtered glass cover filters 97% of UV light and protects your eyes well. The user and people around can watch laser engraving without goggles.

Easy to Install

The all-aluminum anodized structure design makes the machine strong and improves the engraving precision. The installation can be completed within 20-30 minutes.

Safe and Convenient

It also has an emergency stop button, limit switch, and reset switch, which can bring a safer working environment. With the modular design of the fuselage mechanism, you can get 400*850mm super large engraving size by replacing the frame components. (Extension kit is not included)

Specification