- Shipping Company Estimated Delivery Time Shipping Cost
Trusted Shipping Partners: 
and more
Product Summary
The SPARKX i7 Nano Combo pairs the Creality SPARKX i7 FDM printer with the CFS nano four-slot filament system, bringing multicolor printing to a compact desktop setup. The printer runs at up to 500 mm/s, levels automatically on the target area, and watches each job with a built-in AI camera. With a 260 × 260 × 255 mm build volume, quick-swap hotend and Creality Print or Creality Cloud workflow, this package suits hobbyists, families and beginners who want color prints without complex tuning or a large machine.
Highlights
Four Colors Without Manual Filament Swaps
The bundled CFS nano module gives the SPARKX i7 four filament slots, so a single model can be finished in up to four colors instead of one. Automatic loading, unloading and pre-loading keep the material path ready, and run-out detection warns you before a spool empties, which makes multicolor miniatures, props and organizers manageable at home.
Compact System For Shared Desks
Creality lists the CFS nano body at just 127 × 85 × 65 mm and 445 g, so the color module sits beside the printer rather than dominating the table. The printer itself measures 470 × 423 × 456 mm with a 9.12 kg net weight, a realistic fit for a study corner, bedroom desk or classroom bench.
Fast Slicing Windows With Tuned Motion
Printing speed reaches up to 500 mm/s with acceleration up to 10000 mm/s², while layer height stays adjustable between 0.05 and 0.3 mm. Input shaping cancels ringing vibrations and Pressure Advance controls oozing at corners, so a tall batch of figures or a functional bracket finishes quickly without visibly rough surfaces.
Calibration Handled Before Each Job
Full-auto leveling now only probes the target print area, and nozzle Z-offset plus input shaping are completed automatically before the first line is laid down. The 2.85-inch color touchscreen shows each step, so beginners can start a downloaded model without editing printer parameters by hand.
AI Camera Watch And Quiet Nights
The built-in 720p camera with lighting monitors prints in real time for spaghetti, air printing, filament tangle and build plate problems, then notifies you so a failed job can be caught early. A programmable RGB light bar shows status, and Night Mode drops noise and turns all lights off for overnight runs.
Materials, Nozzles And Wear Parts
The printer accepts 1.75 mm PLA, PETG, PLA-CF and TPU at shore hardness 64D or harder, with a 0.4 mm nozzle that is compatible with 0.2, 0.6 and 0.8 mm options. The hotend, extruder lever and filament cutter are quick-swap parts, and a 5-second hot nozzle change keeps downtime low.
Software Ecosystem And File Workflow
Creality Print 6.3 or newer slices both G-code and 3MF files, and jobs arrive over 2.4 GHz Wi-Fi or a USB drive with 8G EMMC storage on board. Creality Cloud adds a large ready-to-print model library, and the CubeMe feature turns a portrait photo into a printable 3D model.
Specifications
| Brand / Model | Creality / SPARKX i7 |
|---|---|
| Bundle Configuration | Nano Combo |
| Bundle Contents | SPARKX i7 printer + CFS nano filament system |
| Printing Technology | Fused Filament Fabrication |
| Build Volume | 260 × 260 × 255 mm |
| Printing Speed | Up to 500 mm/s |
| Acceleration | Up to 10000 mm/s² |
| Layer Height | 0.05-0.3 mm |
| Printing Accuracy (Laboratory) | 100 ± 0.1 mm |
| Nozzle Diameter | 0.4 mm, compatible with 0.2 / 0.6 / 0.8 mm nozzle |
| Nozzle Temperature | Up to 300 °C |
| Heatbed Temperature | Up to 100 °C |
| Build Plate | Dual-sided golden textured PEI |
| Extruder | Direct drive extrusion |
| Filament Diameter | 1.75 mm |
| Printer Filament Compatibility | PLA / PETG / PLA-CF / TPU (shore 64D or harder) |
| Leveling Mode | Full-auto leveling |
| Motion Tuning | Input shaping and Pressure Advance |
| Quick-Swap Parts | Hotend (no tool required), extruder lever, filament cutter |
| AI Camera | 720p with lighting, with rotate-to-cover privacy shield |
| Detection Features | Spaghetti, air printing, filament tangle, build plate check, filament run-out |
| Other Print Features | Power loss recovery, filament run-out resume, cutter wear monitoring |
| Status Lighting | Programmable full-color RGB light bar, Night Mode available |
| Display Screen | 2.85-inch color touchscreen |
| Input Power | 100-240V~ AC 50/60 Hz |
| Rated Power | 700W @ 220V / 400W @ 110V |
| Connectivity | Wi-Fi 2.4 GHz, USB drive, RS 485 (6-pin) accessory port |
| Printable File Format | G-code / 3MF |
| Slicing Software | Creality Print 6.3 or newer versions |
| Firmware / File Storage | Creality OS / 8G EMMC |
| UI Languages | English, German, Spanish, French, Italian, Portuguese, Russian, Turkish, Japanese, Korean, Arabic, Chinese |
| Printer Dimensions / Net Weight | 470 × 423 × 456 mm / 9.12 kg |
| CFS nano Dimensions / Net Weight | 127 × 85 × 65 mm (body) / 445 g |
| CFS nano Filament Slots | 4 slots with open storage, 1 filament feeding motor |
| CFS nano Filament Compatibility | PLA / PETG / PLA-CF, 1.75 ± 0.05 mm |
| CFS nano Spool Compatibility | Inner diameter 32-70 mm, outer diameter up to 220 mm, spool width 10-70 mm |
| CFS nano Power | 24V DC via the RS 485 cable, rated power 15W |
| CFS nano Functions | Multicolor printing, auto filament load/unload, auto refill, pre-load, run-out detection, 4 white/red indicators |
| CFS nano Limits | Filament tangle detection not supported; linking multiple units not supported |
| Combo Package Dimensions / Gross Weight | 552 × 530 × 369 mm / 13.5 kg |
FAQ
Which materials can the CFS nano feed?
Creality lists the CFS nano for PLA, PETG and PLA-CF in 1.75 ± 0.05 mm diameter. The printer itself also accepts TPU of shore 64D or harder when you load filament through the single-spool path instead of the four-slot module.
How many colors can one print use?
Up to four colors, because the CFS nano provides four filament slots. Creality also states that linking several CFS nano units together is not supported, so four slots is the maximum for this package.
Does the combo arrive ready to print?
Creality notes that the i7 is supplied with assembly required and that this combo ships either as one i7 Nano Combo carton or as an i7 plus CFS nano kit, so the module has to be connected to the RS 485 port before multicolor jobs begin.
Which slicer and file formats are supported?
Creality Print 6.3 or newer versions, with G-code and 3MF files transferred by USB drive or 2.4 GHz Wi-Fi.
Important Notes
- This listing covers the SPARKX i7 Nano Combo sales package: one SPARKX i7 printer plus one CFS nano four-slot module.
- Filaments are sold separately.
- Four-color printing works only with the materials Creality lists for the CFS nano: PLA, PETG and PLA-CF.
- Speed, acceleration and accuracy values are the printer's maximum or laboratory ratings, so real results depend on model, layer height and material.
- Creality states that multiple CFS nano units cannot be linked, and that the module has no filament tangle detection.
