- Shipping Company Estimated Delivery Time Shipping Cost
Featuring a 32-bit motherboard and automatic leveling mode, QQ-S Pro is an upgraded version of QQ-S.
FLSUN QQ-S Pro movement system adopts high-precision linear optical axis with self-lubricating graphite bearing to improve printing accuracy and reduce any possible noise during high-speed movement.
Support offline, USB and WiFi printing modes. The powerful Titan extruder is compatible with a variety of commonly used filaments on the market, and is especially designed for hard filament such as PLA. The default printing speed of QQ-S Pro is 60mm/s, printing quality will not be compromised even running at 100mm/s,
Type: 3D Printer
High Speed Delta 3d Printer
|Weight & Size||Product Weight: 14kg
Package Weight: 12kg
Product Size(L x W x H): 76.4*49.2*15.8cm
Package Size(L x W x H): 76.4*49.2*15.8cm
|Package Contents||1 x Product
1 x User Manual
- All (13)
- Images (0)
- Videos (0)
1.Can QQ-S Pro install a second extruder?
No, because there is no reserved installation interface for the second extruder on the motherboard.
2.What are the specifications of the QQ-S Pro power supply?
24V 15A 360W.
3.What is the thermistor model of QQ-S Pro?
4.What is the model of the heating rod of QQ-S Pro?
5.What firmware does QQ-S Pro use?
6.What is the length of each belt of QQ-S Pro and what is its model?
The length of each belt of QQ-S Pro is 1486mm, and the model is 2GT 6mm.
7.What kind of stepper drivers does QQ-S Pro use?
8.Can QQ-S Pro be upgraded to other types of stepper drivers?
Yes, QQ-S Pro can be upgraded to TMC 2208, TMC 2209, etc., but the firmware needs to be updated.
9.What is the length of the parallel arm of QQ-S Pro?
280mm,the distance between the center of the two fish eyeball heads.
10.What are the models of the three fans on the QQ-S pro hot end?
Two 4010 turbo fans, one 4020 cooling fan.
11.What is the model and size of the QQ-S Pro heating block?
E3D V6,and the size is 16*16*12mm.
12.What is the overall size of the QQ-S Pro?
13.Which filament does QQ-S Pro support?
14.What is the maximum temperature of QQ-S Pro nozzle and hot bed?
The temperature of the nozzle does not exceed 250°C, and the temperature of the hot bed does not exceed 90°C.
15.What is the length of the QQ-S Pro PTFE tube?
16.Can the extruder of QQ-S Pro be replaced with another type of extruder, such as BMG extruder, which parameters in the firmware need to be modified?
The extruder of QQ-S Pro can be replaced with another type of extruder. You need to modify the pulse value of the extruder in the line ">EXT0_STEPS_PER_MM 367" to the pulse of the new extruder in the firmware configuration file.
17.What is the model of the pneumatic connector?
18.Can QQ-S Pro upload the latest Marlin? Does FLSUN have Marlin for QQ-S Pro?
QQ-S Pro can upload Marlin, but flsun don’t have official Marlin firmware.