|
Brand: Rcharlance
Item Name: Tiercel
Wheelbase: 215mm
Arm Plate Thickness: 4mm
Bottom Plate Thickness: 4mm
Side Plate Thickness: 2mm
Material: Carbon Fiber
KAKUTE F4 Flight Control Board
IMU: ICM20689 ( SPI ), up to 32KHz
CPU: STM32F405RGT6.
Black Box: Flash 16M
Input Voltage: 2-6S Lipo
Supported firmware: BetaFlight ( pre-loaded ), CleanFlight
Built-in Betaflight OSD to adjust PID
BLHeli - 32 pass-through: support
Automatic voltage monitoring: yes
BEC output: 5V 1.5A, 3.3V 200mA
Mounting hole spacing: 30.5mm
Support Subs/PPM/DSMX receiver
35A 2-6S Blheli-32 4 in 1 ESC
Input Voltage: 2-6S Lipo battery
Constant Current: 30A
Peak Current: 35A
BEC Ouput: NO
Mounting hole spacing: 30.5mm
30A continuous current, 35A burst
32bit compatible ESC (Blheli_32)
Dshot1200 up to 32kHz
Incredibly small size
Very low weight
Auto timing feature
Build in current sensor
Smooth response
Compatible to Betaflight F3/F4 flight controller Support Damped Mode, Oneshot125, Oneshot42,
Multishot, Dshot150, Dshot300, Dshot600, Dshot1200 forward and reverse.
Rcharlance VX30 5.8G 48CH Transmitter
Output power: 25mW/200mW/600mW/800mW switchable
Input voltage: 7-24V
Extra features: smart audio, 0.01mW (parameter-adjusting mode)
Power supply: 5V camera @ under 0.3A max.
Output voltage: 25mW-100mA 200mW-200mA 600mW-270mA 800mW-300mA @ 12V
Range: up to 4km with omnidirectional RHCP antennas
Antenna connector: MMCX, RP-SMA
Port connector: JST, 4pin
Dimensions: 30.5x30.5mm
Supports smart audio (remote parameter adjustment)
FPV CAMERA
CCD: 1/3” Sony SUPER HAD II CCD
Horizontal resolution: 600TVL
TV system: PAL / NTSC
5D-OSD button: yes
Input voltage: 12V DCDimensions(mm): 25X25(W*L)
Menu (OSD): English menu
White Dot Repair: Support
Image Adjustment: Support
Weight: 14.6g(with bracket)
Power Consumption: 70mA
Rcharlance DT2306-2400KV Motor
KV: 2400KV
Battery (Lipo): 2-4S
Spindle diameter: 23mm
Spindle length: 6mm
Out shaft diameter: 5mm
Motor size: Φ33.5 x 39.1mm
Thrust: 2100g (16V 5048 3-blade prop)
Frsky XM+ Receiver
Dimension: 21.5*12*3.5mm(L x W x H)
Weight: 1.6g
Number of channels: up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC)
Operating voltage range: 3.7-10V
Operating current: 30mA @5V
Operating range: full range
With RSSI output on board: analog 0-3.3V
Firmware upgradeable
Compatibility: FrSky D16 mode
|
