- Shipping Company Estimated Delivery Time Shipping Cost
Trusted Shipping Partners: 
and more
Highlights
TFT Display
The transmitter or the receiver of G2 wireless microphone at 2.4G carries a true-color TFT display to make the device readable under different light intensities. The recording mode, battery status, and audio level are all seeable.
Upgraded Algorithm for More Stable, Safe Transmission
The Syncoder™ Encrypted Transmission Algorithm 4.0 in this professional small wireless microphone enhances the signal stability within 656ft/200m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
Small Features Packed for Each Optimization
A button is designed to mute this portable wireless microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must. The one-click noise reduction, gain control on both transmitter & receiver, and real-time monitoring of recorded & input sounds function to give a wider range of adjustment, hence making sure that the system works under more conditions.
Safety Channel Mode for Audio Backup
The G2 comes with two recording modes - Mono mode and Safety Channel mode. The Safety Channel mode is activated by a press on the On/Off button of the receiver. The audio recorded to the right channel is 6dB lower under this mode, thus avoiding audio spikes and offering audio backup.
Integrated Signal Processing for Little Latency Sound Production
The Digital Signal Processor (DSP) chip in the SYNCO G2 optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.
Quick Charge for Every Continued Filming
The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source. It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged.
Wireless Clip on Mini Microphone for Invisible but Audible Effect
The back clip of the transmitter and receiver is upgraded with magnetic suction. In addition to the collar and camera, the transmitter can be directly adsorbed on the metal surface. With the included magnets, you can hide the TX under your clothes for low-profile recording.
Specification
| General |
Brand: SYNCO |
| Transmitter (TX) | Wireless Transmission: Digital 2.4GHz RF Frequency Band: 2400-2483.5MHz Working Distance: 656ft/200m (LOS area); 164ft/50m (NLOS area) Mounting: Pocket Clip Audio Input: 3.5 mm TRS Mic Input Power Requirements: 5V 1A Battery Type: Built-in Lithium Battery, 400mAh Battery Charging Time: 2H Battery Life: 8H Display Screen: TFT Screen Dimensions: 52 x 42 x 17mm Material: ABS Weight: 39g |
| Receiver (RX) | Wireless Transmission: Digital 2.4GHz RF Frequency Band: 2400-2483.5MHz Working Distance: 656ft/200m (LOS area); 164ft/50m (NLOS area) Latency: 20ms Mounting: Pocket Clip Number of Audio Channels: 2 Audio Output: 3.5mm TRS Mic Output; 3.5mm TRS Headphone Output; Type-C Output Volume Adjustment: 6 levels (0-3-6-9-12-15)/(0~30dB) Power Requirements: 5V 1A Battery Type: Built-in Lithium Battery, 400mAh Battery Charging Time: 2H Battery Life: 8H Display Screen: TFT Screen Dimensions: 52 x 42 x 17mm Material: ABS Weight: 39g |
| Microphone | Form Factor: Built-in/External Mic Frequency Range: 50Hz-20KHz Sensitivity: -35dB (±3dB, re 1V/Pa at 1 KHz) Maximum SPL: 120dB SPL (at 1KHz) |
| Weight & Size | Package Weight: 0.3kg Package Size(L x W x H): 18 x 9.7 x 6.3cm |
| Package Contents |
1 x Receiver |
